NSN 6105-00-635-1070
Servomotor
About this product
1.947 inches overall height, ac input current type, dustproof inclosure feature, cooling method: nonventilated.
Manufacturer part number A09C1 for national stock number 6105006351070.
Datasheet
-
Product description
Control Motor NSN 6105-00-635-1070.
-
MPN or Model
A09C1
-
Schedule B
8412.80.9000 (Engines and motors, nesoi) -
Overall Height
1.947 inches -
Overall Length
2.440 inches -
Overall Width
1.947 inches -
Shaft Diameter
0.155 inches single end and 0.156 inches single end -
Current Type
Ac input -
Inclosure Feature
Dustproof -
Mounting Method
End bell -
Mounting Facility Type And Quantity
3 threaded hole -
Cooling Method
Nonventilated -
Control Field Current Rating In Amps
0.225 -
Control Field Impedance Rating In Ohms
133.6 -
Control Field Winding Type
Two windings, series connected -
Current Rating Method
No load -
Inclosure Specificationification
Commercial -
Control Field Voltage Type And Rating In Volts
0.0 ac and 40.0 ac -
Features Provided
Horizontal mounting position and vertical mounting position -
Length Of Shaft From Housing
0.500 inches single end -
Tempurature Rating
71.0 operating degrees celsius -
Mounting Facility Circle Diameter
1.700 inches -
Current Rating In Amps
0.120 single input -
Connection Type And Voltage Rating In Volts
115.0 line to neutral single input -
Shaft End Characteristic
A1 single style single end -
Phase
Single input -
Frequency In Hertz
60.0 input
More from these suppliers
- 4920-00-213-9787 MPN KT419267Aircraft Maintenance Fixture
- 4920-00-301-3665 MPN KT419188Aircraft Maintenance Fixture
- 4920-00-405-0993 MPN 200041332T037Clamp
- 5905-00-434-3167 MPN B600001482Inductive Wire Wound Fixed Resistor
- 5950-00-493-6242 MPN C702842200Inductor
- 5905-00-772-0927 MPN C600007497Inductive Wire Wound Fixed Resistor
- 4920-01-013-5961 MPN T004A135-01Aircraft Maintenance Fixture
- 4920-01-046-1634 MPN T094A158Aircraft Maintenance Fixture
Control Motor
A motor which is designed to be operated from two independent voltage sources, in such a way that variations in one voltage source will determine the direction and speed of the motor. In the alternating current type the voltages are usually applied to a split-phase stator, whereas in the direct current type, one voltage is applied to the stator and the other to the armature. Low inertia and rapid reversibility are inherent characteristics of this type of motor. See also servomotor, automatic pilot.
Pricing and Availability
Get a quote for 6105-00-635-1070 control motorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A09C1 | Kearfott Corporation |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.