NSN 5905-00-068-8264
Resistive Trimmer
Rectangular w/mounting holes/slots body style, round, slotted shaft style, single shaft actuator type, effective electrical rotation in deg angular rotation: between 4320.0 and 6480.0 .
Manufacturer part number 220P1+102 for national stock number 5905000688264.
Datasheet
-
Product description
Nonprecision Wire Wound Variable Resistor NSN 5905-00-068-8264.
-
MPN or Model
220P1+102
-
Schedule B
8533.39.0080 (Wirewound variable resistors, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Unit Weight (Est.)
0.3 lb -
Section Quantity
1 -
Body Style
Rectangular w/mounting holes/slots -
Reliability Indicator
Not established -
Overall Length
Between 1.025 inches and 1.075 inches -
Terminal Length
Between 0.469 inches and 0.531 inches -
Overall Height
Between 0.295 inches and 0.335 inches -
Overall Width
Between 0.639 inches and 0.721 inches -
Mounting Hole Diameter
Between 0.088 inches and 0.098 inches -
Shaft Diameter
Between 0.100 inches and 0.130 inches -
Shaft Length
Between 0.035 inches and 0.065 inches -
Body Length
Between 0.990 inches and 1.010 inches -
Body Width
Between 0.170 inches and 0.190 inches -
Body Height
Between 0.295 inches and 0.335 inches -
Shaft Style
Round, slotted -
Contact Arm Electrical Off Position
Fully cw -
Actuator Type
Single shaft -
Effective Electrical Rotation In Deg Angular Rotation
Between 4320.0 and 6480.0 -
Maximum Starting Torque
8.00 inch-ounces -
Center To Center Distance Between Terminals
Between 0.590 inches and 0.610 inches -
Lateral Distance Between Mounting Hole Centers
Between 0.745 inches and 0.755 inches -
Mounting Facility Quantity
2 -
Terminal Location
Rear end -
Mounting Method
Unthreaded hole -
Features Provided
Nonmetallic shaft -
Electrical Resistance Per Section
1.0 kilohms single section -
Rotary Actuator Travel In Angular Deg
Between 4320.0 and 6480.0 -
Center To Center Distance Between Center Terminal And Outside Terminal
Between 0.160 inches and 0.180 inches -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
150.0 single section -
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-50.0 to 50.0 single section -
Power Dissipation Rating Per Section In Watts
0.7 free air single section -
Resistance Tolerance Per Section In Percent
-5.0 to 5.0 single section -
Actuator Travel Control Feature
Stops -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
85.0 single section -
Standard Taper Curve Per Section
A single section -
Test Data Document
81349-mil-r-27208 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Terminal Type And Quantity
3 pin -
Specification Data
81349-mil-r-27208/2 government specification
More from these suppliers
- 5905-00-471-2218 MPN DMS 84013BNonprecision Nonwire Wound Variable Resistor
- 5985-00-646-2365 MPN 90041Antenna
- 5935-00-872-6853 MPN DMS84028BElectrical Connector Backshell
- 5935-01-147-8943 MPN LO3251Electrical Receptacle Connector
- 5935-01-263-6856 MPN ESC001KB 14 15SNElectrical Plug Connector
- 5945-01-289-2084 MPN 103-597-1Electromagnetic Relay
- 4820-01-294-1548 MPN X3-481-75000-10Expansion Valve
- 4820-01-338-2027 MPN 1.4840-54Ball Valve
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-00-068-8264 nonprecision wire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
220P1+102 | Bourns Instruments Inc |
RT10C2P102 | Military Specifications |
MILR27208 | Military Specifications |
680RT10C2P102 | Vishay Dale Electronics Llc |
DMS85017 | Dla Land And Maritime |