NSN 5905-00-646-5613
Conductive Plastic Variable Resistor
Cylindrical bushing mounted body style, between 1.968 inches and 2.031 inches first flat length, between 0.211 inches and 0.221 inches flat height, shaft style: round, flatted.
Manufacturer part number RV4NATFK502A for national stock number 5905006465613.
Datasheet
-
Product description
Nonprecision Nonwire Wound Variable Resistor NSN 5905-00-646-5613.
-
MPN or Model
RV4NATFK502A
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Section Quantity
1 -
Body Style
Cylindrical bushing mounted -
Reliability Indicator
Not established -
Overall Length
3.062 inches -
First Flat Length
Between 1.968 inches and 2.031 inches -
Flat Height
Between 0.211 inches and 0.221 inches -
Body Diameter
Between 1.032 inches and 1.156 inches -
Shaft Diameter
Between 0.248 inches and 0.251 inches -
Shaft Length
Between 2.468 inches and 2.531 inches -
Mounting Bushing Length
Between 0.344 inches and 0.390 inches -
Body Length
Between 0.468 inches and 0.656 inches -
Shaft Style
Round, flatted -
Shaft Bearing Type
Sleeve -
Actuator Type
Single shaft -
Effective Electrical Rotation In Deg Angular Rotation
Between 309.0 and 320.0 -
Maximum Starting Torque
6.00 inch-ounces -
Maximum Running Torque
6.00 inch-ounces -
Maximum Stop Torque
128.00 inch-ounces -
Nonturn Device Location
At 9 oclock -
Nonturn Device Radius
Between 0.515 inches and 0.547 inches -
Fragility Factor
Moderately rugged -
Screw Thread Diameter
Between 0.313 inches and 0.437 inches -
Screw Thread Series Designator
Unef -
Screw Thready Qty Per Inch (tpi)
32.0 -
Terminal Location
Radially positioned over less than half the circumference -
Mounting Method
Standard bushing -
Features Provided
Humidity proof -
Cubic Measure
0.528 cubic inches -
Electrical Resistance Per Section
5.000 kilohms single section -
Rotary Actuator Travel In Angular Deg
Between 309.0 and 320.0 -
Resistance Tempurature Characteristic Range Per Section In Percent
-3.0 to 0.0 -55 degrees celsius single section and -5.0 to 10.0 -25 degrees celsius single section and -5.0 to 10.0 25 degrees celsius single section and +0.0 to 3.0 120 degrees celsius single section -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
85.0 single section -
Power Dissipation Rating Per Section In Watts
2.0 free air single section -
Resistance Tolerance Per Section In Percent
-10.0 to 10.0 single section -
Actuator Travel Control Feature
Stops -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
40.0 single section -
Standard Taper Curve Per Section
A single section -
Test Data Document
81349-mil-r-94 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Terminal Type And Quantity
3 tab, solder lug -
Specification Data
81349-mil-r-94/5 government specification
More from these suppliers
- 5905-00-001-2905 MPN MIL-R-39005/1Noninductive Wire Wound Fixed Resistor
- 5905-00-003-4666 MPN MIL-R-55182/5Film Fixed Resistor
- 5905-00-004-6045 MPN RBR71L46121AMNoninductive Wire Wound Fixed Resistor
- 5905-00-004-6083 MPN RNC60H1371FMFilm Fixed Resistor
- 5905-00-005-2657 MPN RBR71L105R8BRNoninductive Wire Wound Fixed Resistor
- 5905-00-005-2686 MPN RN65C5002FFilm Fixed Resistor
- 5905-00-005-8932 MPN RNC65H3011FRFilm Fixed Resistor
- 5905-00-006-2978 MPN RN60B30R1FFilm Fixed Resistor
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-00-646-5613 nonprecision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
RV4NATFK502A | Military Specifications |
MIL-R-94/5 | Military Specifications |