NSN 5905-00-770-5691
Conductive Plastic Variable Resistor
Rectangular w/mounting holes/slots body style, round, slotted shaft style, single shaft actuator type, effective electrical rotation in deg angular rotation: between 6120.0 and 9720.0 .
Manufacturer part number RJ11BL253 for national stock number 5905007705691.
Datasheet
-
Product description
Nonprecision Nonwire Wound Variable Resistor NSN 5905-00-770-5691.
-
MPN or Model
RJ11BL253
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
Section Quantity
1 -
Body Style
Rectangular w/mounting holes/slots -
Reliability Indicator
Not established -
Overall Length
Between 1.254 inches and 1.359 inches -
Terminal Length
6.000 inches -
Overall Height
Between 0.235 inches and 0.300 inches -
Overall Width
Between 0.235 inches and 0.300 inches -
Mounting Hole Diameter
Between 0.088 inches and 0.098 inches -
Shaft Diameter
Between 0.100 inches and 0.140 inches -
Shaft Length
Between 0.036 inches and 0.077 inches -
Body Length
Between 1.218 inches and 1.282 inches -
Body Width
Between 0.235 inches and 0.300 inches -
Body Height
Between 0.235 inches and 0.300 inches -
Shaft Style
Round, slotted -
Actuator Type
Single shaft -
Effective Electrical Rotation In Deg Angular Rotation
Between 6120.0 and 9720.0 -
Maximum Starting Torque
8.00 inch-ounces -
Center To Center Distance Between Terminals
Between 0.490 inches and 0.510 inches -
Fragility Factor
Moderately delicate -
Lateral Distance Between Mounting Hole Centers
Between 0.109 inches and 0.160 inches -
Mounting Facility Quantity
2 -
Terminal Location
Lower adjacent side single row -
Mounting Method
Unthreaded hole -
Electrical Resistance Per Section
25.0 kilohms single section -
Rotary Actuator Travel In Angular Deg
Between 6120.0 and 9720.0 -
Center To Center Distance Between Center Terminal And Outside Terminal
Between 0.290 inches and 0.310 inches -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
125.0 single section -
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-600.0 to 600.0 single section -
Power Dissipation Rating Per Section In Watts
0.25 free air single section -
Resistance Tolerance Per Section In Percent
-10.0 to 10.0 single section -
Actuator Travel Control Feature
Clutch -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
70.0 single section -
Standard Taper Curve Per Section
A single section -
Test Data Document
81349-mil-r-22097 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Terminal Type And Quantity
3 pin -
Specification Data
81349-mil-r-22097/1 government specification
More from these suppliers
- 5905-00-001-2840 MPN RBR52L16150BRNoninductive Wire Wound Fixed Resistor
- 5905-00-001-5837 MPN RNC50J1132BSFilm Fixed Resistor
- 5905-00-004-5818 MPN RC42CF360JSComposition Fixed Resistor
- 5905-00-004-6130 MPN RNR70C3241FSFilm Fixed Resistor
- 5935-00-004-7677 MPN MILC83723-73Electrical Receptacle Connector
- 5905-00-005-2667 MPN RBR71L488R0BMNoninductive Wire Wound Fixed Resistor
- 5905-00-006-5404 MPN RBR54L18700BRNoninductive Wire Wound Fixed Resistor
- 5905-00-006-6908 MPN RNC60H1181FPFilm Fixed Resistor
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-00-770-5691 nonprecision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
RJ11BL253 | Military Specifications |
MILR22097-1 | Military Specifications |