NSN 5905-00-813-5911
Conductive Plastic Variable Resistor
Rectangular w/mounting holes/slots body style, round, slotted shaft style, single shaft actuator type, maximum starting torque: 8.00 inch-ounces.
Manufacturer part number RJ12CP504 for national stock number 5905008135911.
Datasheet
-
Product description
Nonprecision Nonwire Wound Variable Resistor NSN 5905-00-813-5911.
-
MPN or Model
RJ12CP504
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Unit Weight (Est.)
0.1 lb -
Section Quantity
1 -
Body Style
Rectangular w/mounting holes/slots -
Reliability Indicator
Not established -
Overall Length
Between 1.300 inches and 1.340 inches -
Terminal Length
Between 0.469 inches and 0.531 inches -
Overall Height
Between 0.769 inches and 0.861 inches -
Overall Width
Between 0.180 inches and 0.200 inches -
Mounting Hole Diameter
0.093 inches -
Shaft Diameter
Between 0.100 inches and 0.130 inches -
Shaft Length
Between 0.060 inches and 0.080 inches -
Body Length
Between 1.240 inches and 1.260 inches -
Body Width
Between 0.180 inches and 0.200 inches -
Body Height
Between 0.300 inches and 0.330 inches -
Shaft Style
Round, slotted -
Actuator Type
Single shaft -
Maximum Starting Torque
8.00 inch-ounces -
Center To Center Distance Between Terminals
Between 0.890 inches and 0.910 inches -
Lateral Distance Between Mounting Hole Centers
Between 0.890 inches and 0.910 inches -
Mounting Facility Quantity
2 -
Terminal Location
Rear-bottom -
Mounting Method
Terminal and unthreaded hole -
Center To Center Distance Between Terminal Rows
0.700 inches -
Features Provided
Nonmetallic shaft -
Electrical Resistance Per Section
500.0 kilohms single section -
Center To Center Distance Between Center Terminal And Outside Terminal
Between 0.190 inches and 0.210 inches -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
150.0 single section -
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-250.0/+250.0 single section -
Power Dissipation Rating Per Section In Watts
0.75 free air single section -
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
85.0 single section -
Test Data Document
81349-mil-r-22097 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Terminal Type And Quantity
3 pin -
Specification Data
81349-mil-r-22097/2 government specification
More from these suppliers
- 5930-00-010-0998 MPN 2132449Stepping Switch
- 5935-00-067-7487 MPN 2493936Electrical Receptacle Connector
- 5905-00-101-2141 MPN 499902PC9Inductive Wire Wound Fixed Resistor
- 5905-00-153-8237 MPN 2877112Nonprecision Wire Wound Variable Resistor
- 5940-00-170-9642 MPN 424394PC17Terminal Board
- 5905-00-189-2469 MPN 1820888-110Film Fixed Resistor
- 5935-00-196-7256 MPN 2460982-081Electrical Receptacle Connector
- 5930-00-201-4429 MPN 57A5A23-1Switch Actuator Adapter
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-00-813-5911 nonprecision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
RJ12CP504 | Military Specifications |
MIL-R-22097/2 | Military Specifications |
2851840-5 | Navair And Navsea Managed |