NSN 5905-00-910-5716
Wire Wound Variable Resistor
Cylindrical servo mounted body style, 0.5000 inches pilot diameter, 0.0620 inches pilot length, undercut diameter: 0.625 inches .
Manufacturer part number 381-1647-000 for national stock number 5905009105716.
Datasheet
-
Product description
Precision Wire Wound Variable Resistor NSN 5905-00-910-5716.
-
MPN or Model
381-1647-000
-
Schedule B
8533.39.0080 (Wirewound variable resistors, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Section Quantity
1 -
Body Style
Cylindrical servo mounted -
Reliability Indicator
Not established -
Pilot Diameter
0.5000 inches -
Pilot Length
0.0620 inches -
Overall Length
2.166 inches -
Undercut Diameter
0.625 inches -
Undercut Width
0.0680 inches -
Body Diameter
0.875 inches -
Angle Of Mounting Hole In Deg
45.0 -
Angle Between Centerlines Of Mounting Holes In Deg
120.0 -
Shaft Diameter
0.1247 inches -
Shaft Length
0.593 inches -
Body Length
1.573 inches -
Overall Diameter
1.250 inches -
Mounting Lip Diameter
0.8750 inches -
Mounting Lip Depth
0.0620 inches -
Mounting Hole/stud Circle Diameter
0.343 inches -
Shaft Style
Round -
Shaft Bearing Type
Ball -
Actuator Type
Single shaft with gear -
Effective Electrical Rotation In Deg Angular Rotation
Between 3600.0 and 3610.0 -
Maximum Starting Torque
0.40 inch-ounces -
Maximum Running Torque
0.30 inch-ounces -
Maximum Stop Torque
100.00 inch-ounces -
Shaft End Play
0.005 inches -
Shaft Runout
0.002 inches -
Lateral Runout
0.002 inches -
Pilot Diameter Runout
0.002 inches -
Shaft Radial Play
0.002 inches -
Screw Thread Diameter
0.086 inches -
Screw Thread Series Designator
Unc -
Screw Thready Qty Per Inch (tpi)
56.0 -
Mounting Facility Quantity
3 -
Terminal Location
Radially positioned over more than half the circumference -
Mounting Method
Clamp ring and threaded hole -
Electrical Resistance Per Section
100.0 percent, rated amperes c and better flooring -
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation
180.0 single section and 3420.0 single section -
Rotary Actuator Travel In Angular Deg
Between 3600.0 and 3610.0 -
Function Conformity Tolerance Per Section
-0.05/+0.05 single section -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
125.0 single section -
Power Dissipation Rating Per Section In Watts
3.0 7th secondary quality -
Function Conformity Per Section
Single section terminal base linearity -
Fixed Tap Quantity Per Section
2 single section -
Tap Location Tolerance Per Section
-2.0/+2.0 degrees angular rotation single section -
Resistance Tolerance Per Section In Percent
-3.0/+3.0 single section -
Actuator Travel Control Feature
Stops -
Function Characteristic Per Section
7 oclock all primaries -
Tempurature Coefficient Of Resistance Wire Per Section In Ppm Per Deg Celsius
-20.0/+20.0 single section -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
40.0 single section -
Precious Material And Location
Terminal surfaces gold -
Precious Material
Gold -
Test Data Document
13499-381-1647-000 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) -
Terminal Type And Quantity
6 tab, solder lug
More from these suppliers
- 5905-00-172-8061 MPN 534-101Precision Wire Wound Variable Resistor
- 5905-00-912-1560 MPN 500-5034Precision Wire Wound Variable Resistor
- 5935-00-006-9136 MPN 372-7443-00Electrical Connector Polarizing Key
- 5930-00-086-9848 MPN 259-1378-000Rotary Switch
- 5905-00-100-3944 MPN 710-0013-00Inductive Wire Wound Fixed Resistor
- 5985-00-103-1255 MPN 783-4141-002Antenna Control Subassembly
- 5950-00-137-7272 MPN 678-0142-010Reactor
- 5950-00-143-8534 MPN GA1258CRadio Frequency Transformer
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity) of the output is equal to or less than plus or munus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable, for items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, nonwire wound, nonprecision; resistor (1), variable, nonwire wound, precision; and resistor (1), variable, wire wound, nonprecision.
![Mechanic Bill explains Wire Wound Variable Resistor](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5905-00-910-5716 precision wire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
381-1647-000 | Rockwell Collins, Inc. |
381-1647-00 | Rockwell Collins, Inc. |
381-1647-00 | Rockwell Collins, Inc. |
502-0243 | Vishay Thin Film, Llc |
500-1269 | Vishay Thin Film, Llc |
Stock Check
![](/public/images/partscage_shelf3.png)