NSN 5905-00-913-1792
Conductive Plastic Variable Resistor
Rectangular w/mounting holes/slots body style, round, slotted shaft style, single shaft actuator type, effective electrical rotation in deg angular rotation: between 6120.0 and 9720.0 .
Manufacturer part number RJ11AP104 for national stock number 5905009131792.
Datasheet
-
Product description
Nonprecision Nonwire Wound Variable Resistor NSN 5905-00-913-1792.
-
MPN or Model
RJ11AP104
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Section Quantity
1 -
Body Style
Rectangular w/mounting holes/slots -
Overall Length
Between 1.254 inches and 1.359 inches -
Terminal Length
Between 0.469 inches and 0.624 inches -
Overall Height
Between 0.235 inches and 0.300 inches -
Overall Width
Between 0.235 inches and 0.300 inches -
Mounting Hole Diameter
Between 0.088 inches and 0.098 inches -
Shaft Diameter
Between 0.100 inches and 0.140 inches -
Shaft Length
Between 0.036 inches and 0.077 inches -
Body Length
Between 1.218 inches and 1.282 inches -
Body Width
Between 0.235 inches and 0.300 inches -
Body Height
Between 0.235 inches and 0.300 inches -
Shaft Style
Round, slotted -
Actuator Type
Single shaft -
Effective Electrical Rotation In Deg Angular Rotation
Between 6120.0 and 9720.0 -
Maximum Starting Torque
8.00 inch-ounces -
Center To Center Distance Between Terminals
Between 0.490 inches and 0.510 inches -
Lateral Distance Between Mounting Hole Centers
Between 0.109 inches and 0.260 inches -
Mounting Facility Quantity
2 -
Terminal Location
Lower adjacent side two rows -
Mounting Method
Unthreaded hole -
Center To Center Distance Between Terminal Rows
0.100 inches -
Electrical Resistance Per Section
100.000 kilohms single section -
Rotary Actuator Travel In Angular Deg
Between 6120.0 and 9720.0 -
Center To Center Distance Between Center Terminal And Outside Terminal
0.300 inches -
Resistance Tempurature Characteristic Range Per Section In Percent
+0.0/+8.0 -55 degrees celsius single section and +0.0/+4.0 -25 degrees celsius single section and -3.0/+3.0 85 degrees celsius single section and -6.5/+6.5 125 degrees celsius single section -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
125.0 single section -
Power Dissipation Rating Per Section In Watts
0.25 free air single section -
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section -
Actuator Travel Control Feature
Clutch -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
70.0 single section -
Standard Taper Curve Per Section
A single section -
Test Data Document
81349-milr22097-1 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Terminal Type And Quantity
3 pin
More from these suppliers
- 5935-00-001-3163 MPN M81511-26E2045S1Electrical Plug Connector
- 5905-00-005-2682 MPN RNC60H1180FRFilm Fixed Resistor
- 5905-00-006-5501 MPN RNC60J3240BSFilm Fixed Resistor
- 5905-00-009-2980 MPN RNC70K2492FSFilm Fixed Resistor
- 5905-00-009-8045 MPN RNC70H5110FRFilm Fixed Resistor
- 5905-00-044-4323 MPN MILR10509Film Fixed Resistor
- 5905-00-052-8758 MPN MIL-R-93/4Noninductive Wire Wound Fixed Resistor
- 5905-00-059-2461 MPN MILR10509-2Film Fixed Resistor
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-00-913-1792 nonprecision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
RJ11AP104 | Military Specifications |
MILR22097-1 | Military Specifications |