NSN 5905-00-923-3567
Conductive Plastic Variable Resistor
Rectangular w/mounting holes/slots body style, round, slotted shaft style, single shaft actuator type, effective electrical rotation in deg angular rotation: between 6120.0 and 9720.0 .
Manufacturer part number RJ11AS501 for national stock number 5905009233567.
Datasheet
-
Product description
Nonprecision Nonwire Wound Variable Resistor NSN 5905-00-923-3567.
-
MPN or Model
RJ11AS501
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Unit Weight (Est.)
0.1 lb -
Section Quantity
1 -
Body Style
Rectangular w/mounting holes/slots -
Reliability Indicator
Not established -
Overall Length
Between 1.254 inches and 1.359 inches -
Overall Height
Between 0.235 inches and 0.300 inches -
Overall Width
Between 0.235 inches and 0.300 inches -
Mounting Hole Diameter
Between 0.088 inches and 0.098 inches -
Shaft Diameter
Between 0.100 inches and 0.140 inches -
Shaft Length
Between 0.036 inches and 0.077 inches -
Body Length
Between 1.218 inches and 1.282 inches -
Body Width
Between 0.235 inches and 0.300 inches -
Body Height
Between 0.235 inches and 0.300 inches -
Shaft Style
Round, slotted -
Actuator Type
Single shaft -
Effective Electrical Rotation In Deg Angular Rotation
Between 6120.0 and 9720.0 -
Maximum Starting Torque
8.00 inch-ounces -
Center To Center Distance Between Terminals
Between 0.490 inches and 0.510 inches -
Lateral Distance Between Mounting Hole Centers
Between 0.109 inches and 0.160 inches -
Mounting Facility Quantity
2 -
Terminal Location
Lower adjacent side single row -
Mounting Method
Unthreaded hole -
Center To Center Distance Between Terminal Rows
0.100 inches -
Electrical Resistance Per Section
500.0 ohms single section -
Rotary Actuator Travel In Angular Deg
Between 6120.0 and 9720.0 -
Center To Center Distance Between Center Terminal And Outside Terminal
Between 0.290 inches and 0.310 inches -
Resistance Tempurature Characteristic Range Per Section In Percent
+0.0/+4.5 -55 degrees celsius single section and +0.0/+2.5 -25 degrees celsius single section and -0.0/+0.0 25 degrees celsius single section and -1.5/+1.5 85 degrees celsius single section and -4.0/+4.0 125 degrees celsius single section -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
125.0 single section -
Power Dissipation Rating Per Section In Watts
0.25 free air single section -
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section -
Actuator Travel Control Feature
Clutch -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
70.0 single section -
Standard Taper Curve Per Section
A single section -
Test Data Document
81349-mil-r-22097 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Terminal Type And Quantity
3 tab, solder lug -
Specification Data
81349-mil-r-22097/1 government specification
More from these suppliers
- 5905-00-004-6036 MPN RBR71L26001ARNoninductive Wire Wound Fixed Resistor
- 5905-00-005-2660 MPN MIL-R-39005/6Noninductive Wire Wound Fixed Resistor
- 5905-00-005-2682 MPN RNR60H1180FSFilm Fixed Resistor
- 5905-00-005-2880 MPN RN55C5112FTXFilm Fixed Resistor
- 5905-00-007-3837 MPN RLR05C5100GRFilm Fixed Resistor
- 5905-00-008-8354 MPN RNC60H8450FSFilm Fixed Resistor
- 5930-00-018-0920 MPN MILS8805-1Sensitive Switch
- 5905-00-028-3452 MPN RNR70H1000FMFilm Fixed Resistor
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-00-923-3567 nonprecision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
RJ11AS501 | Military Specifications |
MILR22097-1 | Military Specifications |
MIL-PRF-22097/1 | Military Specifications |