NSN 5905-00-994-7233
Conductive Plastic Variable Resistor
Rectangular w/mounting holes/slots body style, round, slotted shaft style, single shaft actuator type, effective electrical rotation in deg angular rotation: between 6120.0 and 9720.0 .
Manufacturer part number RJ12CL105 for national stock number 5905009947233.
Datasheet
-
Product description
Nonprecision Nonwire Wound Variable Resistor NSN 5905-00-994-7233.
-
MPN or Model
RJ12CL105
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Unit Weight (Est.)
0.1 lb -
Section Quantity
1 -
Body Style
Rectangular w/mounting holes/slots -
Reliability Indicator
Not established -
Overall Length
Between 1.300 inches and 1.340 inches -
Terminal Length
6.000 inches -
Overall Height
Between 0.300 inches and 0.320 inches -
Overall Width
Between 0.180 inches and 0.200 inches -
Mounting Hole Diameter
Between 0.088 inches and 0.098 inches -
Shaft Diameter
Between 0.100 inches and 0.130 inches -
Shaft Length
Between 0.060 inches and 0.080 inches -
Body Length
Between 1.240 inches and 1.260 inches -
Body Width
Between 0.180 inches and 0.200 inches -
Body Height
0.315 inches -
Shaft Style
Round, slotted -
Actuator Type
Single shaft -
Effective Electrical Rotation In Deg Angular Rotation
Between 6120.0 and 9720.0 -
Maximum Starting Torque
8.00 inch-ounces -
Center To Center Distance Between Terminals
Between 0.890 inches and 0.910 inches -
Lateral Distance Between Mounting Hole Centers
1.000 inches -
Mounting Facility Quantity
2 -
Terminal Location
Rear end -
Mounting Method
Unthreaded hole -
Electrical Resistance Per Section
1.0 megohms single section -
Rotary Actuator Travel In Angular Deg
Between 6120.0 and 9720.0 -
Center To Center Distance Between Center Terminal And Outside Terminal
Between 0.690 inches and 0.710 inches -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
150.0 single section -
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-250.0/+250.0 single section -
Power Dissipation Rating Per Section In Watts
0.75 free air single section -
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section -
Actuator Travel Control Feature
Clutch -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
85.0 single section -
Standard Taper Curve Per Section
A single section -
Test Data Document
81349-mil-r-22097 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Terminal Type And Quantity
3 pin -
Specification Data
81349-mil-r-22097/2 government specification
More from these suppliers
- 5905-00-001-2815 MPN RNR65E3401FSFilm Fixed Resistor
- 5935-00-001-5729 MPN MIL-C-26500Electrical Plug Connector
- 5905-00-004-0189 MPN RBR56L57401BRNoninductive Wire Wound Fixed Resistor
- 5905-00-005-2711 MPN RWR74SR511FPInductive Wire Wound Fixed Resistor
- 5905-00-006-2942 MPN RBR71L16501BRNoninductive Wire Wound Fixed Resistor
- 5935-00-008-4354 MPN MIL-C-38999Electrical Plug Connector
- 5905-00-008-6825 MPN RNR60C8250FSFilm Fixed Resistor
- 5905-00-009-6519 MPN RNC70H1213FSFilm Fixed Resistor
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-00-994-7233 nonprecision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
RJ12CL105 | Military Specifications |
MIL-R-22097/2 | Military Specifications |