NSN 5905-01-188-4278
Conductive Plastic Variable Resistor
Rectangular w/mounting holes/slots body style, round, slotted shaft style, single shaft actuator type, effective electrical rotation in deg angular rotation: between 6120.0 and 9720.0 .
Manufacturer part number RJ12CY203JM for national stock number 5905011884278.
Datasheet
-
Product description
Nonprecision Nonwire Wound Variable Resistor NSN 5905-01-188-4278.
-
MPN or Model
RJ12CY203JM
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Unit Weight (Est.)
0.1 lb -
Section Quantity
1 -
Body Style
Rectangular w/mounting holes/slots -
Reliability Indicator
Established -
Reliability Failure Rate Level In Percent
0.100 -
Overall Length
1.340 inches -
Terminal Length
0.500 inches -
Overall Height
0.861 inches -
Overall Width
0.200 inches -
Mounting Hole Diameter
0.093 inches -
Shaft Diameter
0.115 inches -
Shaft Length
0.085 inches -
Body Length
1.250 inches -
Body Width
0.190 inches -
Body Height
0.315 inches -
Shaft Style
Round, slotted -
Actuator Type
Single shaft -
Effective Electrical Rotation In Deg Angular Rotation
Between 6120.0 and 9720.0 -
Maximum Starting Torque
8.00 inch-ounces -
Maximum Running Torque
8.00 inch-ounces -
Center To Center Distance Between Terminals
0.700 inches -
Fragility Factor
Moderately delicate -
Lateral Distance Between Mounting Hole Centers
1.000 inches -
Mounting Facility Quantity
2 -
Terminal Location
Lower adjacent side two rows -
Mounting Method
Terminal and unthreaded hole -
Center To Center Distance Between Terminal Rows
0.100 inches -
Electrical Resistance Per Section
20.000 percent, rated amperes c and better flooring -
Rotary Actuator Travel In Angular Deg
Between 6120.0 and 9720.0 -
Center To Center Distance Between Center Terminal And Outside Terminal
0.300 inches -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
150.0 single section -
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-250.0/+250.0 single section -
Power Dissipation Rating Per Section In Watts
0.75 7th secondary quality -
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section -
Actuator Travel Control Feature
Clutch -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
85.0 single section -
Standard Taper Curve Per Section
A single section -
Test Data Document
81349-mil-r-39035 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Terminal Type And Quantity
3 pin -
Specification Data
81349-mil-r-39035/1 government specification
More from these suppliers
- 5905-00-001-2847 MPN RV2LAYSD753CNonprecision Nonwire Wound Variable Resistor
- 5905-00-005-8911 MPN RNC60C1822FRFilm Fixed Resistor
- 5905-00-006-5636 MPN MIL-R-39005/5Noninductive Wire Wound Fixed Resistor
- 5905-00-006-7104 MPN RNR60C1331FMFilm Fixed Resistor
- 5905-00-008-8291 MPN MIL-R-39007/12Inductive Wire Wound Fixed Resistor
- 5905-00-008-8354 MPN RNR60H8450FPFilm Fixed Resistor
- 5905-00-009-9953 MPN RNC65H4322FSFilm Fixed Resistor
- 5935-00-013-9453 MPN M39012/16-0011Electrical Plug Connector
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-01-188-4278 nonprecision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
RJ12CY203JM | Military Specifications |
RJR12CY203M | Military Specifications |
RJR12CY203P | Military Specifications |
MIL-R-39035/1 | Military Specifications |