NSN 5905-01-205-7356
Conductive Plastic Variable Resistor
Cylindrical bushing mounted body style, round, slotted shaft style, rotary switch type, switch voltage rating in volts: 117.0.
Manufacturer part number JS1E056S502AA for national stock number 5905012057356.
Datasheet
-
Product description
Nonprecision Nonwire Wound Variable Resistor NSN 5905-01-205-7356.
-
MPN or Model
JS1E056S502AA
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Unit Weight (Est.)
0.1 lb -
Section Quantity
1 -
Body Style
Cylindrical bushing mounted -
Reliability Indicator
Not established -
Body Diameter
1.094 inches -
Shaft Diameter
0.250 inches -
Shaft Length
0.875 inches -
Mounting Bushing Length
0.375 inches -
Body Length
0.828 inches -
Shaft Style
Round, slotted -
Switch Type
Rotary -
Switch Voltage Rating In Volts
117.0 -
Actuator Type
Single shaft -
Effective Electrical Rotation In Deg Angular Rotation
Between 330.0 and 340.0 -
Maximum Starting Torque
6.00 inch-ounces -
Maximum Running Torque
6.00 inch-ounces -
Maximum Stop Torque
128.00 inch-ounces -
Nonturn Device Location
At 9 oclock -
Nonturn Device Radius
0.531 inches -
Switch Operating Position
Start of rotation -
Switch Contact Arrangement
Single pole, single throw, normally open, both positions maintained -
Screw Thread Diameter
0.375 inches -
Screw Thread Series Designator
Unef -
Screw Thready Qty Per Inch (tpi)
32.0 -
Terminal Location
Rear-bottom -
Mounting Method
Standard bushing -
Features Provided
Panel seal and shaft seal and switch -
Cubic Measure
0.528 cubic inches -
Electrical Resistance Per Section
5.000 kilohms single section -
Rotary Actuator Travel In Angular Deg
Between 330.0 and 340.0 -
Resistance Tempurature Characteristic Range Per Section In Percent
-3.0/+0.0 -55 degrees celsius single section and -5.0/+10.0 -25 degrees celsius single section and -5.0/+10.0 25 degrees celsius single section and +0.0/+3.0 120 degrees celsius single section -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
120.0 single section -
Power Dissipation Rating Per Section In Watts
1.0 free air single section -
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section -
Actuator Travel Control Feature
Stops -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
70.0 single section -
Switch Current Type And Rating In Amps
3.000 ac/dc -
Standard Taper Curve Per Section
C single section -
Test Data Document
81349-mil-r-94 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Terminal Type And Quantity
5 tab, solder lug -
Specification Data
81349-mil-r-94/5 government specification
More from these suppliers
- 5930-00-007-0678 MPN 800HR6Push Switch
- 5905-00-101-7896 MPN GB36G5Composition Fixed Resistor
- 5905-00-111-6010 MPN RC20GF914JComposition Fixed Resistor
- 5905-00-174-4903 MPN JD2G056F153BANonprecision Nonwire Wound Variable Resistor
- 5905-00-192-0626 MPN C0HB1231Composition Fixed Resistor
- 5905-00-284-2788 MPN RC20GF102JComposition Fixed Resistor
- 5905-00-348-3539 MPN CVC5895WNASC102Nonprecision Nonwire Wound Variable Resistor
- 5905-00-489-0918 MPN W7682Nonprecision Nonwire Wound Variable Resistor
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-01-205-7356 nonprecision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
JS1E056S502AA | Rockwell Automation, Inc. |
RV4SBYSD502C | Military Specifications |
MIL-R-94/5 | Military Specifications |
MIL-PRF-94/5 | Military Specifications |