NSN 5905-01-259-6116
Conductive Plastic Variable Resistor
Cylindrical bushing mounted body style, round, slotted shaft style, sleeve shaft bearing type, switch type: rotary.
Manufacturer part number RV4SBYSB104A for national stock number 5905012596116.
Datasheet
-
Product description
Nonprecision Nonwire Wound Variable Resistor NSN 5905-01-259-6116.
-
MPN or Model
RV4SBYSB104A
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Unit Weight (Est.)
0.1 lb -
Section Quantity
1 -
Body Style
Cylindrical bushing mounted -
Reliability Indicator
Not established -
Overall Length
1.531 inches -
Body Diameter
1.094 inches -
Shaft Diameter
0.250 inches -
Shaft Length
0.500 inches -
Mounting Bushing Length
0.375 inches -
Body Length
0.828 inches -
Overall Diameter
1.874 inches -
Shaft Style
Round, slotted -
Shaft Bearing Type
Sleeve -
Switch Type
Rotary -
Switch Voltage Rating In Volts
117.0 -
Actuator Type
Single shaft -
Effective Electrical Rotation In Deg Angular Rotation
340.0 -
Maximum Starting Torque
6.00 inch-ounces -
Maximum Running Torque
6.00 inch-ounces -
Maximum Stop Torque
128.00 inch-ounces -
Nonturn Device Location
At 9 oclock -
Nonturn Device Radius
0.531 inches -
Switch Operating Position
Start of rotation -
Switch Contact Arrangement
Single pole, single throw, normally open, both positions maintained -
Fragility Factor
Moderately rugged -
Screw Thread Diameter
0.375 inches -
Screw Thread Series Designator
Unef -
Screw Thready Qty Per Inch (tpi)
32.0 -
Terminal Location
Rear-bottom -
Mounting Method
Standard bushing -
Features Provided
Panel seal and switch -
Electrical Resistance Per Section
100.0 kilohms single section -
Rotary Actuator Travel In Angular Deg
340.0 -
Resistance Tempurature Characteristic Range Per Section In Percent
-3.0/+0.0 -55 degrees celsius single section and -5.0/+10.0 -25 degrees celsius single section and -5.0/+10.0 25 degrees celsius single section and +0.0/+3.0 120 degrees celsius single section -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
120.0 single section -
Power Dissipation Rating Per Section In Watts
2.0 free air single section -
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section -
Actuator Travel Control Feature
Stops -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
70.0 single section -
Switch Current Type And Rating In Amps
3.000 ac -
Standard Taper Curve Per Section
A single section -
Test Data Document
81349-mil-r-94 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Terminal Type And Quantity
5 tab, solder lug -
Specification Data
81349-mil-r-94/5 government specification
More from these suppliers
- 5935-00-001-3157 MPN MILC81511-21Electrical Receptacle Connector
- 5905-00-004-6031 MPN RBR71L23911BMNoninductive Wire Wound Fixed Resistor
- 5935-00-004-7678 MPN MILC83723-73Electrical Receptacle Connector
- 5935-00-006-1203 MPN MILC83723-71Electrical Receptacle Connector
- 5905-00-006-5496 MPN RNR60H4993BMFilm Fixed Resistor
- 5905-00-006-5554 MPN RBR52L60R40BRNoninductive Wire Wound Fixed Resistor
- 5905-00-006-5562 MPN MIL-R-39017/5Film Fixed Resistor
- 5905-00-006-6941 MPN MILR55182-3Film Fixed Resistor
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-01-259-6116 nonprecision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
RV4SBYSB104A | Military Specifications |
MIL-R-94/5 | Military Specifications |
MIL-PRF-94/5 | Military Specifications |