NSN 5905-01-279-7986
Nonwire Wound Variable Resistor
Knob on rear end of shaft 0.6232 in. Dia min. And 0.6238 in. Dia max; 500 ohm,0.25 watt internal resistor connected to wiper.
Manufacturer part number FCP119H-25 for national stock number 5905012797986.
Datasheet
-
Product description
Precision Nonwire Wound Variable Resistor NSN 5905-01-279-7986.
-
MPN or Model
FCP119H-25
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Unit Weight (Est.)
0.2 lb -
Section Quantity
1 -
Body Style
Cylindrical servo mounted -
Reliability Indicator
Not established -
Pilot Diameter
Between 1.8745 inches and 1.8750 inches -
Pilot Length
Between 0.0350 inches and 0.0670 inches -
Undercut Diameter
Between 1.8745 inches and 1.8750 inches -
Undercut Width
0.0550 inches -
Body Diameter
2.000 centimeters -
Angle Of Mounting Hole In Deg
30.0 -
Angle Between Centerlines Of Mounting Holes In Deg
60.0 -
Shaft Diameter
Between 0.2495 inches and 0.2500 inches -
Shaft Length
Between 2.155 inches and 2.208 inches -
Body Length
0.910 inches -
Mounting Lip Diameter
2.0000 inches -
Mounting Lip Depth
0.0550 mils and 0.0670 centimeters -
Mounting Hole/stud Circle Diameter
Between 1.682 inches and 1.692 inches -
Shaft Style
Round, slotted -
Shaft Bearing Type
Ball -
Actuator Type
Double ended shaft -
Effective Electrical Rotation In Deg Angular Rotation
350.0 -
Maximum Starting Torque
0.60 inch-ounces -
Maximum Running Torque
0.60 inch-ounces -
Shaft End Play
0.005 inches -
Shaft Runout
0.002 inches -
Lateral Runout
0.002 inches -
Pilot Diameter Runout
0.001 inches -
Shaft Radial Play
0.001 inches -
Fragility Factor
Moderately rugged -
Screw Thread Diameter
Between 0.076 inches and 0.096 inches -
Screw Thread Series Designator
Unc -
Screw Thready Qty Per Inch (tpi)
56.0 -
Mounting Facility Quantity
4 -
Terminal Location
Radially positioned over more than half the circumference -
Mounting Method
Clamp ring and threaded hole -
Features Provided
Humidity proof -
Cubic Measure
0.910 cubic inches -
Electrical Resistance Per Section
2.0 percent, rated amperes c and better flooring -
Tap Location From Ccw Terminal Per Section In Deg Of Effective Electrical Rotation
1000.0 single section -
Rotary Actuator Travel In Angular Deg
360.0 -
Function Conformity Tolerance Per Section
-0.10/+0.10 single section -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
125.0 single section -
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-400.0/+400.0 single section -
Power Dissipation Rating Per Section In Watts
2.0 7th secondary quality -
Function Conformity Per Section
Single section independent linearity -
Fixed Tap Quantity Per Section
1 single section -
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section -
Actuator Travel Control Feature
Continuous motion -
Function Characteristic Per Section
7 oclock all primaries -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
25.0 single section -
Test Data Document
82577-960024 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) -
Terminal Type And Quantity
4 turret
More from these suppliers
- 5905-00-019-4594 MPN 09B4514Precision Nonwire Wound Variable Resistor
- 5905-01-052-5800 MPN 78FL1-347Precision Nonwire Wound Variable Resistor
- 5935-00-004-5882 MPN 922454-2Electrical Plug Connector
- 5935-00-004-6163 MPN 3195518-1Electrical Plug Connector
- 5905-00-078-8257 MPN 4171406-873Film Fixed Resistor
- 5930-00-172-9888 MPN 253579-2Code Indicating Wheel Switch
- 5905-00-258-8755 MPN 719283-60REVAInductive Wire Wound Fixed Resistor
- 5975-00-421-7504 MPN 481990-150Electrical Equipment Mounting Base
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rehostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable nonwire wound, nonprecision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-01-279-7986 precision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FCP119H-25 | Carter Manufacturing Corporation |
200FL1-245 | Honeywell International Inc. |
20SF7478 | Es Beta, Inc. |
960024-4B | Raytheon Company |