NSN 5905-01-282-9802
Conductive Plastic Variable Resistor
Cylindrical bushing mounted body style, between 0.422 inches and 0.454 inches first flat length, between 0.092 inches and 0.096 inches flat height, shaft style: round, flatted.
Manufacturer part number PC70112-1 for national stock number 5905012829802.
Datasheet
-
Product description
Nonprecision Nonwire Wound Variable Resistor NSN 5905-01-282-9802.
-
MPN or Model
PC70112-1
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Unit Weight (Est.)
0.2 lb -
Section Quantity
1 -
Body Style
Cylindrical bushing mounted -
Reliability Indicator
Not established -
First Flat Length
Between 0.422 inches and 0.454 inches -
Flat Height
Between 0.092 inches and 0.096 inches -
Body Diameter
Between 0.484 inches and 0.516 inches -
Shaft Diameter
Between 0.124 inches and 0.126 inches -
Shaft Length
Between 0.484 inches and 0.516 inches -
Mounting Bushing Length
Between 0.234 inches and 0.266 inches -
Body Length
0.594 inches -
Shaft Style
Round, flatted -
Shaft Bearing Type
Sleeve -
Switch Type
Rotary -
Switch Voltage Rating In Volts
28.0 -
Actuator Type
Single shaft -
Effective Electrical Rotation In Deg Angular Rotation
248.0 -
Maximum Starting Torque
4.50 inch-ounces -
Maximum Running Torque
4.50 inch-ounces -
Maximum Stop Torque
64.00 inch-ounces -
Nonturn Device Location
At 12 oclock -
Nonturn Device Radius
Between 0.086 inches and 0.096 inches -
Mechanical Backlash In Deg Angular Rotation
3.0 -
Switch Operating Position
Start of rotation -
Switch Contact Arrangement
Single pole, single throw, normally open, both positions maintained -
Fragility Factor
Moderately rugged -
End Application
F-15e acft -
Screw Thread Diameter
Between 0.234 inches and 0.266 inches -
Screw Thread Series Designator
Unef -
Screw Thready Qty Per Inch (tpi)
32.0 -
Terminal Location
Rear-bottom -
Mounting Method
Standard bushing -
Features Provided
Humidity proof and switch -
Cubic Measure
0.082 cubic inches -
Electrical Resistance Per Section
10.0 kilohms single section -
Rotary Actuator Travel In Angular Deg
Between 290.0 and 300.0 -
Resistance Tempurature Characteristic Range Per Section In Percent
+0.0/+7.0 -55 degrees celsius single section and +0.0/+3.5 -25 degrees celsius single section and +0.0/+2.0 0 degrees celsius single section and -2.5/+2.5 85 degrees celsius single section and +0.0/+5.5 120 degrees celsius single section -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
120.0 single section -
Power Dissipation Rating Per Section In Watts
0.5 free air single section -
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section -
Actuator Travel Control Feature
Stops -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
70.0 single section -
Switch Current Type And Rating In Amps
1.500 dc -
Standard Taper Curve Per Section
A single section -
Terminal Type And Quantity
6 tab, solder lug -
Specification Data
09344-pc70112 manufacturers source control
More from these suppliers
- 5905-00-102-3041 MPN GB2235Composition Fixed Resistor
- 5905-00-112-0966 MPN CC3013FFilm Fixed Resistor
- 5905-00-168-9273 MPN EB18021Composition Fixed Resistor
- 5905-00-193-2095 MPN JD1N056S253UANonprecision Nonwire Wound Variable Resistor
- 5905-00-410-7499 MPN GS1G032P502UANonprecision Nonwire Wound Variable Resistor
- 5905-00-458-7016 MPN GW7349Nonprecision Nonwire Wound Variable Resistor
- 5905-00-556-4090 MPN JA1N048P151UANonprecision Nonwire Wound Variable Resistor
- 5905-00-642-3948 MPN J28569DNonprecision Nonwire Wound Variable Resistor
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
![Mechanic Bill explains Conductive Plastic Variable Resistor](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5905-01-282-9802 nonprecision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
PC70112-1 | Rockwell Collins, Inc. |
GS8819 | Clarostat Sensors And Controls |
10127845 | Nimikkeistokeskus Ncb Finland |
GS8819 | Rockwell Automation, Inc. |
Stock Check
![](/public/images/partscage_shelf3.png)