NSN 5905-01-296-7521
Conductive Plastic Variable Resistor
Cylindrical bushing mounted body style, 0.250 inches first flat length, between 0.092 inches and 0.096 inches flat height, shaft style: round, flatted.
Manufacturer part number 1809620 for national stock number 5905012967521.
Datasheet
-
Product description
Nonprecision Nonwire Wound Variable Resistor NSN 5905-01-296-7521.
-
MPN or Model
1809620
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Section Quantity
1 -
Body Style
Cylindrical bushing mounted -
Reliability Indicator
Not established -
First Flat Length
0.250 inches -
Flat Height
Between 0.092 inches and 0.096 inches -
Body Diameter
0.500 inches -
Shaft Diameter
Between 0.124 inches and 0.126 inches -
Shaft Length
0.750 inches -
Mounting Bushing Length
0.375 inches -
Body Length
0.812 inches -
Shaft Style
Round, flatted -
Shaft Bearing Type
Bearing -
Switch Type
Rotary -
Switch Voltage Rating In Volts
125.0 -
Actuator Type
Single shaft -
Effective Electrical Rotation In Deg Angular Rotation
Between 290.0 and 300.0 -
Maximum Starting Torque
13.00 inch-ounces -
Maximum Running Torque
13.00 inch-ounces -
Maximum Stop Torque
32.00 inch-ounces -
Nonturn Device Location
At 10 oclock -
Nonturn Device Radius
0.250 inches -
Mechanical Backlash In Deg Angular Rotation
3.0 -
Switch Operating Position
Start of rotation -
Switch Contact Arrangement
Single pole, single throw, normally open, both positions maintained -
Fragility Factor
Moderately rugged -
End Application
An-apn-59e -
Screw Thread Diameter
0.250 inches -
Screw Thread Series Designator
Unef -
Screw Thready Qty Per Inch (tpi)
32.0 -
Terminal Location
Radially positioned over less than half the circumference -
Mounting Method
Standard bushing -
Features Provided
Humidity proof and switch -
Cubic Measure
0.005 cubic inches -
Electrical Resistance Per Section
100.0 kilohms single section -
Rotary Actuator Travel In Angular Deg
Between 290.0 and 300.0 -
Resistance Tempurature Characteristic Range Per Section In Percent
+0.0/+8.0 -55 degrees celsius single section and +0.0/+4.0 -25 degrees celsius single section and -3.0/+3.0 85 degrees celsius single section and +0.0/+6.0 120 degrees celsius single section -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
100.0 single section -
Power Dissipation Rating Per Section In Watts
0.5 free air single section -
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section -
Actuator Travel Control Feature
Stops -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
70.0 single section -
Switch Current Type And Rating In Amps
1.000 ac -
Standard Taper Curve Per Section
A single section -
Test Data Document
03956-1809620 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) -
Terminal Type And Quantity
3 tab, solder lug
More from these suppliers
- 5905-00-138-5053 MPN CC7870FFilm Fixed Resistor
- 5950-00-148-2771 MPN 2A11DElectrical Coil
- 5905-00-172-0855 MPN 2100-0465Nonprecision Nonwire Wound Variable Resistor
- 5985-00-481-8336 MPN JJ89965Variable Attenuator
- 5905-00-491-4674 MPN BB8225Composition Fixed Resistor
- 5905-00-542-9316 MPN JA1N032S502ANonprecision Nonwire Wound Variable Resistor
- 5905-00-577-1945 MPN GB6835Composition Fixed Resistor
- 5905-00-722-3801 MPN JL80085Nonprecision Nonwire Wound Variable Resistor
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-01-296-7521 nonprecision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1809620 | Northrop Grumman Systems Corporation |
WRS1N048F104U | Clarostat Sensors And Controls |
WRS1N048F104U | Rockwell Automation, Inc. |