NSN 5905-01-304-4325
Conductive Plastic Variable Resistor
Cylindrical bushing mounted body style, between 0.282 inches and 0.406 inches first flat length, between 0.211 inches and 0.221 inches flat height, shaft style: round, flatted.
Manufacturer part number RV4NAYFE104A for national stock number 5905013044325.
Datasheet
-
Product description
Nonprecision Nonwire Wound Variable Resistor NSN 5905-01-304-4325.
-
MPN or Model
RV4NAYFE104A
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Unit Weight (Est.)
0.1 lb -
Section Quantity
1 -
Body Style
Cylindrical bushing mounted -
Reliability Indicator
Not established -
First Flat Length
Between 0.282 inches and 0.406 inches -
Flat Height
Between 0.211 inches and 0.221 inches -
Body Diameter
Between 1.032 inches and 1.156 inches -
Shaft Diameter
Between 0.248 inches and 0.251 inches -
Shaft Length
Between 0.844 inches and 0.906 inches -
Mounting Bushing Length
Between 0.360 inches and 0.406 inches -
Body Length
Between 0.468 inches and 0.656 inches -
Shaft Style
Round, flatted -
Actuator Type
Single shaft -
Effective Electrical Rotation In Deg Angular Rotation
Between 330.0 and 340.0 -
Maximum Starting Torque
6.00 inch-ounces -
Maximum Running Torque
6.00 inch-ounces -
Maximum Stop Torque
128.00 inch-ounces -
Nonturn Device Location
At 9 oclock -
Nonturn Device Radius
Between 0.515 inches and 0.547 inches -
Fragility Factor
Moderately rugged -
Screw Thread Diameter
Between 0.313 inches and 0.437 inches -
Screw Thread Series Designator
Unef -
Screw Thready Qty Per Inch (tpi)
32.0 -
Terminal Location
Radially positioned over less than half the circumference -
Mounting Method
Standard bushing -
Cubic Measure
3.624 cubic inches -
Electrical Resistance Per Section
100.0 kilohms single section -
Rotary Actuator Travel In Angular Deg
Between 330.0 and 340.0 -
Resistance Tempurature Characteristic Range Per Section In Percent
-3.0/+0.0 -55 degrees celsius single section and -5.0/+10.0 -25 degrees celsius single section and -5.0/+10.0 25 degrees celsius single section and +0.0/+3.0 120 degrees celsius single section -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
120.0 single section -
Power Dissipation Rating Per Section In Watts
1.0 free air single section -
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section -
Actuator Travel Control Feature
Stops -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
70.0 single section -
Standard Taper Curve Per Section
F single section -
Test Data Document
81349-mil-r-94 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Terminal Type And Quantity
3 tab, solder lug -
Specification Data
81349-mil-r-94/5 government specification
More from these suppliers
- 5935-00-001-5823 MPN M83723/71R22326Electrical Receptacle Connector
- 5905-00-005-2665 MPN RBR71L455R6BRNoninductive Wire Wound Fixed Resistor
- 5930-00-005-8950 MPN M3786/4-3019Rotary Switch
- 5905-00-006-5495 MPN MILR55182-3Film Fixed Resistor
- 5905-00-006-7043 MPN MILR55182-3Film Fixed Resistor
- 5905-00-007-3837 MPN RLR05C5100GRFilm Fixed Resistor
- 5935-00-008-4348 MPN MILC83723-42Electrical Plug Connector
- 5905-00-008-8518 MPN MIL-R-18546/1Inductive Wire Wound Fixed Resistor
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-01-304-4325 nonprecision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
RV4NAYFE104A | Military Specifications |
MIL-R-94/5 | Military Specifications |
RV4NAYFE104A | Raytheon Company |
MIL-PRF-94/5 | Military Specifications |