NSN 5905-01-339-6491
Conductive Plastic Variable Resistor
Cylindrical bushing mounted body style, between 0.562 inches and 0.625 inches first flat length, between 0.211 inches and 0.221 inches flat height, shaft style: round, flatted.
Manufacturer part number RV4SBYFD502C for national stock number 5905013396491.
Datasheet
-
Product description
Nonprecision Nonwire Wound Variable Resistor NSN 5905-01-339-6491.
-
MPN or Model
RV4SBYFD502C
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Section Quantity
1 -
Body Style
Cylindrical bushing mounted -
Reliability Indicator
Not established -
First Flat Length
Between 0.562 inches and 0.625 inches -
Flat Height
Between 0.211 inches and 0.221 inches -
Body Diameter
Between 1.032 inches and 1.156 inches -
Shaft Diameter
Between 0.248 inches and 0.251 inches -
Shaft Length
Between 0.844 inches and 0.906 inches -
Mounting Bushing Length
Between 0.360 inches and 0.432 inches -
Body Length
Between 0.468 inches and 0.750 inches -
Shaft Style
Round, flatted -
Shaft Bearing Type
Sleeve -
Switch Type
Push-pull -
Switch Voltage Rating In Volts
117.0 -
Actuator Type
Single shaft -
Effective Electrical Rotation In Deg Angular Rotation
Between 330.0 and 340.0 -
Maximum Starting Torque
6.00 inch-ounces -
Maximum Running Torque
6.00 inch-ounces -
Maximum Stop Torque
128.00 inch-ounces -
Nonturn Device Location
At 9 oclock -
Nonturn Device Radius
Between 0.515 inches and 0.547 inches -
Switch Operating Position
Any position of rotation travel -
Switch Contact Arrangement
Single pole, single throw, normally open, both positions maintained -
Fragility Factor
Moderately rugged -
Screw Thread Diameter
Between 0.313 inches and 0.437 inches -
Screw Thread Series Designator
Unef -
Screw Thready Qty Per Inch (tpi)
32.0 -
Terminal Location
Rear-bottom -
Mounting Method
Standard bushing -
Features Provided
Humidity proof and panel seal and shaft seal and switch -
Electrical Resistance Per Section
5.0 kilohms single section -
Rotary Actuator Travel In Angular Deg
Between 330.0 and 340.0 -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
120.0 single section -
Power Dissipation Rating Per Section In Watts
1.0 free air single section -
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section -
Actuator Travel Control Feature
Stops -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
70.0 single section -
Switch Current Type And Rating In Amps
3.000 dc -
Standard Taper Curve Per Section
C single section -
Test Data Document
81349-mil-r-94 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Terminal Type And Quantity
5 tab, solder lug -
Specification Data
81349-mil-r-94/5 government specification
More from these suppliers
- 5905-00-004-6083 MPN RNC60H1371FPFilm Fixed Resistor
- 5935-00-005-2826 MPN MILC83723-72Electrical Receptacle Connector
- 5905-00-006-5494 MPN RNC60H2432FPFilm Fixed Resistor
- 5905-00-006-6987 MPN RNC60K5761FMFilm Fixed Resistor
- 5935-00-008-4324 MPN MILC83723-87Electrical Plug Connector
- 5905-00-009-1156 MPN RNC55J2942BRFilm Fixed Resistor
- 5905-00-009-6545 MPN MILR10509Film Fixed Resistor
- 5905-00-035-4333 MPN RER75F2002MInductive Wire Wound Fixed Resistor
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-01-339-6491 nonprecision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
RV4SBYFD502C | Military Specifications |
MIL-R-94/5 | Military Specifications |
MIL-PRF-94/5 | Military Specifications |