NSN 5905-01-342-0717
Conductive Plastic Variable Resistor
Rectangular bushing mounted body style, round shaft style, sleeve shaft bearing type, switch type: push-pull.
Manufacturer part number D6002921-1 for national stock number 5905013420717.
Datasheet
-
Product description
Nonprecision Nonwire Wound Variable Resistor NSN 5905-01-342-0717.
-
MPN or Model
D6002921-1
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Unit Weight (Est.)
0.1 lb -
Section Quantity
1 -
Body Style
Rectangular bushing mounted -
Reliability Indicator
Not established -
Terminal Length
0.250 inches -
Shaft Diameter
Between 0.124 inches and 0.126 inches -
Shaft Length
Between 1.063 inches and 1.125 inches -
Mounting Bushing Length
Between 0.235 inches and 0.265 inches -
Body Length
0.781 inches -
Body Width
Between 0.475 inches and 0.525 inches -
Body Height
0.500 inches -
Shaft Style
Round -
Shaft Bearing Type
Sleeve -
Switch Type
Push-pull -
Switch Voltage Rating In Volts
30.0 -
Actuator Type
Single shaft -
Effective Electrical Rotation In Deg Angular Rotation
Between 290.0 and 300.0 -
Maximum Starting Torque
3.00 inch-ounces -
Maximum Running Torque
3.00 inch-ounces -
Maximum Stop Torque
48.00 inch-ounces -
Nonturn Device Location
At 4 oclock and at 8 oclock -
Nonturn Device Radius
0.500 inches -
Switch Operating Position
Any position of rotation travel -
Switch Contact Arrangement
Single pole, double throw, three positions maintained -
Center To Center Distance Between Terminals
0.200 inches -
Fragility Factor
Moderately rugged -
End Application
5895-01-233-2919 communication system control group -
Screw Thread Diameter
0.250 inches -
Screw Thread Series Designator
Unef -
Screw Thready Qty Per Inch (tpi)
32.0 -
Terminal Location
Lower adjacent side single row -
Mounting Method
Standard bushing -
Features Provided
Humidity proof and switch -
Cubic Measure
0.195 cubic inches -
Electrical Resistance Per Section
10.0 percent, rated amperes c and better flooring -
Rotary Actuator Travel In Angular Deg
Between 290.0 and 300.0 -
Center To Center Distance Between Center Terminal And Outside Terminal
0.100 inches -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
150.0 single section -
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius
-150.0/+150.0 single section -
Power Dissipation Rating Per Section In Watts
0.5 7th secondary quality -
Resistance Tolerance Per Section In Percent
-10.0/+10.0 single section -
Actuator Travel Control Feature
Stops -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
85.0 single section -
Switch Current Type And Rating In Amps
0.250 dc -
Standard Taper Curve Per Section
A single section -
Precious Material And Location
Terminal surfaces gold -
Precious Material
Gold -
Test Data Document
57045-d6002921 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) -
Terminal Type And Quantity
3 pin
More from these suppliers
- 5905-00-027-7082 MPN 43C1-2500Nonprecision Wire Wound Variable Resistor
- 5905-00-093-0905 MPN VC5E500R0JInductive Wire Wound Fixed Resistor
- 5905-00-279-2756 MPN 47Nonprecision Nonwire Wound Variable Resistor
- 5905-00-476-5776 MPN CM40976Nonprecision Nonwire Wound Variable Resistor
- 5905-00-535-2494 MPN 10049499-15Nonprecision Nonwire Wound Variable Resistor
- 5905-00-549-2771 MPN 49W9Nonprecision Wire Wound Variable Resistor
- 5985-00-642-0673 MPN CIL58Variable Attenuator
- 5905-00-755-2209 MPN 470-20KP0RM20PCT 7/8 IN. SHAFTNonprecision Nonwire Wound Variable Resistor
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rheostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-01-342-0717 nonprecision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
D6002921-1 | Clarostat Sensors And Controls |
CM45839 | Clarostat Sensors And Controls |
D6002921-1 | Department Of The Army Us Army |