NSN 5905-01-347-1997
Nonwire Wound Variable Resistor
Cylindrical servo mounted body style, between 0.7495 inches and 0.7505 inches pilot diameter, between 0.0570 inches and 0.0670 inches pilot length, undercut diameter: 0.781 inches .
Manufacturer part number 717801828-001 for national stock number 5905013471997.
Datasheet
-
Product description
Precision Nonwire Wound Variable Resistor NSN 5905-01-347-1997.
-
MPN or Model
717801828-001
-
Schedule B
8533.40.0080 (Variable resistors, including potentiometers, nesoi) -
NMF (National Motor Freight)
062960 - Reostats/parts NOI -
Unit Weight (Est.)
0.1 lb -
Section Quantity
1 -
Body Style
Cylindrical servo mounted -
Reliability Indicator
Not established -
Pilot Diameter
Between 0.7495 inches and 0.7505 inches -
Pilot Length
Between 0.0570 inches and 0.0670 inches -
Undercut Diameter
0.781 inches -
Undercut Width
0.0570 inches -
Body Diameter
0.906 centimeters -
Shaft Diameter
Between 0.1245 inches and 0.1255 inches -
Shaft Length
Between 0.594 inches and 0.656 inches -
Body Length
0.810 inches -
Mounting Lip Diameter
Between 0.8650 inches and 0.8800 inches -
Mounting Lip Depth
0.0570 mils and 0.0670 centimeters -
Shaft Style
Round, slotted -
Shaft Bearing Type
Sleeve -
Actuator Type
Single shaft -
Effective Electrical Rotation In Deg Angular Rotation
320.0 -
Maximum Starting Torque
0.50 inch-ounces -
Maximum Running Torque
0.40 inch-ounces -
Shaft End Play
0.005 inches -
Shaft Runout
0.002 inches -
Lateral Runout
0.002 inches -
Pilot Diameter Runout
0.001 inches -
Shaft Radial Play
0.001 inches -
Mechanical Backlash In Deg Angular Rotation
0.1 -
Fragility Factor
Moderately rugged -
End Application
Lantirnnavpod -
Terminal Location
Radially positioned over less than half the circumference -
Mounting Method
Clamp -
Features Provided
Humidity proof -
Cubic Measure
0.522 cubic inches -
Electrical Resistance Per Section
10.0 percent, rated amperes c and better flooring -
Rotary Actuator Travel In Angular Deg
360.0 -
Resistance Tempurature Characteristic Range Per Section In Percent
-5.0/+5.0 -65 degrees celsius single section and -4.0/+4.0 -15 degrees celsius single section and -2.5/+2.5 0 degrees celsius single section and -2.5/+2.5 50 degrees celsius single section and -5.0/+5.0 75 degrees celsius single section and -5.0/+5.0 105 degrees celsius single section and -5.0/+5.0 125 degrees celsius single section -
Function Conformity Tolerance Per Section
-0.25/+0.25 single section -
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power
125.0 single section -
Power Dissipation Rating Per Section In Watts
1.0 7th secondary quality -
Function Conformity Per Section
Single section independent linearity -
Resistance Tolerance Per Section In Percent
-5.0/+5.0 single section -
Actuator Travel Control Feature
Continuous motion -
Function Characteristic Per Section
7 oclock all primaries -
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power
70.0 single section -
Special Test Features
Resistors supplied are intended for use in flight hardware -
Test Data Document
04939-717801828 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing) -
Terminal Type And Quantity
3 turret -
Departure From Cited Designator
Clamp rings are not acceptable
More from these suppliers
- 5935-00-876-6545 MPN 8087323Electrical Connector Cover
- 5905-01-171-8309 MPN 71341050Non-wire Wound Variable Resistor
- 5935-01-223-0384 MPN 13081998-29Receptacle Dummy Connector
- 5935-01-223-9416 MPN 13083171Electrical Connector Backshell
- 5930-01-227-0371 MPN 13083875-8Switch Actuator Arm
- 5985-01-321-4001 MPN 717701464-001Waveguide Adapter
- 4920-01-343-3380 MPN 717751260Aircraft Maintenance Fixture
- 4820-01-518-4857 MPN 13077922Valve Cover Plate
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually postioned taps designed to be set and fixed prior to use, see resistor, adjustable. For items with step by step variation, see rehostat and resistor, step by step. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. Excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable nonwire wound, nonprecision; and resistor (1), variable, wire wound, precision.
Pricing and Availability
Get a quote for 5905-01-347-1997 precision nonwire wound variable resistorManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
717801828-001 | Honeywell International Inc. |
717801828-001 | Lockheed Martin Corporation |