NSN 5320-00-160-2375
Blind High Strength Fastener
About this product
0.655 inches fastener length, flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) head style, between 0.163 inches and 0.164 inches shank diameter, shank style: self-plugging mechanically locked stem.
Manufacturer part number MS90353S0508 for national stock number 5320001602375.
Datasheet
-
Product description
Blind Rivet NSN 5320-00-160-2375.
-
MPN or Model
MS90353S0508
-
Schedule B
7318.23.0000 (Rivets of iron or steel) -
NMF (National Motor Freight)
106510 - Rivets I/s Plain/galvanized Etc -
Fastener Length
0.655 inches -
Head Style
Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) -
Shank Diameter
Between 0.163 inches and 0.164 inches -
Shank Style
Self-plugging mechanically locked stem -
Head Major Diameter
0.333 inches -
Expansion Device
Serrated stem-type w -
Grip Length
Between 0.469 inches and 0.532 inches -
Min. Tensile Strength (psi)
112000 pounds per square inch -
Hardness Rating
48.0 rockwell c and 53.0 rockwell c stem -
Shear Strength
2340 single pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4027 or steel comp 4037 or steel comp 4130 sleeve -
Material Specification
Astm a547 assn standard single material response or mil-s-6049 military specification single material response stem -
Surface Treatment
Anodize or chromate stem -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response sleeve
More from these suppliers
- 5305-00-150-3411 MPN NAS1191-08P10WLKSocket Head Cap Screw
- 5305-01-013-9600 MPN BM19031-7-29DClose Tolerance Screw
- 5305-01-129-7600 MPN HT4025L7-18Close Tolerance Screw
- 5305-01-141-7197 MPN HT4020-5-21AYShoulder Screw
- 5305-01-146-6872 MPN DCT7900-8-D-3Panel Screw Assembly
- 5305-01-173-3598 MPN LD111-0044-2408Close Tolerance Screw
- 5306-00-017-6089 MPN TK916-5-13HShear Bolt
- 5306-00-079-0907 MPN BM55132-3-10AShear Bolt
Blind Rivet
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes nut, blind assembly.
Pricing and Availability
Get a quote for 5320-00-160-2375 blind rivetManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS90353S0508 | Military Standards |
SB100-T05-08 | Huck International, Inc. |
SB100T05-08 | Huck |
CR7310S-5-08 | Klx Aerospace Solutions Ii Sas |
SB100-T05-08 | Huck International, Inc. |
CR7310S-5-08 | Klx Inc |
Stock Check
Availability for this item was last checked on 03/14/23.
The quantities and conditions available at the time were:
- NS: 1704
- NE: 3478