NSN 5320-00-181-6328
Blind High Strength Fastener
About this product
Between 2.158 inches and 2.188 inches fastener length, flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) head style, between 0.372 inches and 0.374 inches shank diameter, shank style: self-plugging mechanically locked stem.
Manufacturer part number MS90353-1230 for national stock number 5320001816328.
Datasheet
-
Product description
Blind Rivet NSN 5320-00-181-6328.
-
MPN or Model
MS90353-1230
-
Schedule B
7318.23.0000 (Rivets of iron or steel) -
NMF (National Motor Freight)
106510 - Rivets I/s Plain/galvanized Etc -
Unit Weight (Est.)
0.1 lb -
Fastener Length
Between 2.158 inches and 2.188 inches -
Head Style
Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) -
Shank Diameter
Between 0.372 inches and 0.374 inches -
Shank Style
Self-plugging mechanically locked stem -
Head Major Diameter
0.762 inches -
Expansion Device
Serrated stem-type w -
Grip Length
Between 1.844 inches and 1.907 inches -
Hardness Rating
48.0 rockwell c stem and 53.0 rockwell c stem -
Shear Strength
12200 single pounds per square inch -
Countersink Angle
Between 99.0 degrees and 100.0 degrees -
Material
Steel comp 8740 stem -
Material Specification
Mil-s-6049 military specification single material response stem or astm a547 assn standard single material response stem -
Surface Treatment
Cadmium stem -
Surface Treatment Specification
Qq-p-416, type 2, cl2 federal specification single treatment response sleeve
More from these suppliers
- 5305-01-137-5225 MPN FLW7900L8-A-3Panel Screw Assembly
- 5305-01-232-9760 MPN FRB7500P-10-C-4Panel Screw Assembly
- 5305-01-351-6939 MPN DF33001V-4T-8Close Tolerance Screw
- 5320-00-877-6990 MPN B100-T05-02Blind Rivet
- 5320-01-086-4963 MPN HC3213-5-09Blind Rivet
- 5320-01-274-8384 MPN 7MLS100-M05-07Pin-rivet
- 5320-01-354-5191 MPN SMLS100-M04-07CBlind Rivet
- 5320-01-411-0104 MPN 0B100-EU08-4Blind Rivet
Blind Rivet
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes nut, blind assembly.
Pricing and Availability
Get a quote for 5320-00-181-6328 blind rivetManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS90353-1230 | Military Standards |
B100-T12-30 | Huck International, Inc. |
B100-T12-30 | Huck International, Inc. |
B100-T12-30 | Huck Mfg Co |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.