NSN 5320-01-373-2628
Blind High Strength Fastener
About this product
Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) head style, between 0.125 inches and 0.129 inches shank diameter, between 0.221 inches and 0.229 inches head major diameter, expansion device: serrated stem-type w.
Manufacturer part number CR3852-4-2 for national stock number 5320013732628.
Datasheet
-
Product description
Blind Rivet NSN 5320-01-373-2628.
-
MPN or Model
CR3852-4-2
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
096320 - Rivets I/s Nickel Plated Buffed -
Unit Weight (Est.)
0.1 lb -
Head Style
Flush (flat) countersunk (included angle - less than 135 degrees w or w/o chamfer) -
Shank Diameter
Between 0.125 inches and 0.129 inches -
Head Major Diameter
Between 0.221 inches and 0.229 inches -
Expansion Device
Serrated stem-type w -
Grip Length
1.160 inches -
Min. Tensile Strength (psi)
570 pounds per square inch -
Shear Strength
1220 single pounds per square inch -
Countersink Angle
Between 98.5 degrees and 101.5 degrees -
Material
Iron alloy 660 mechanical locknickel alloy 600 sleevenickel alloy x-750 stem -
Material Specification
Ams 5731 assn standard single material response mechanical lockams 5687 assn standard single material response sleeveams 5698 assn standard single material response stem
More from these suppliers
- 4920-00-034-9009 MPN 1C5272P15Frame Fixture Assembly Clamp
- 4920-00-241-4111 MPN 1C6333G01Aircraft Engine Maintenance Fixture
- 4920-00-953-5312 MPN 21C621G001Aircraft Maintenance Kit
- 5905-00-959-0450 MPN R999P0462ANoninductive Wire Wound Fixed Resistor
- 4920-01-065-1980 MPN 21C3715G001Aircraft Maintenance Fixture
- 4920-01-246-1530 MPN 3C3160G04Aircraft Maintenance Kit
- 4820-01-248-5146 MPN 9498M26Ball Valve
- 5905-01-249-7542 MPN J167P5052ANoninductive Wire Wound Fixed Resistor
Blind Rivet
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes nut, blind assembly.
Pricing and Availability
Get a quote for 5320-01-373-2628 blind rivetManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
CR3852-4-2 | Sps Technologies, Llc |
1451M23P01 | General Electric Company |
Stock Check
Availability for this item was last checked on 10/11/23.
The quantities and conditions available at the time were:
- NE: 115
- NS: 10