NSN 5305-00-001-4779
Tap Bolt
2.000 inches fastener length, hexagon head style, between 0.455 inches and 0.483 inches head height, width between flats: between 1.100 inches and 1.125 inches .
Manufacturer part number 1611208PC155 for national stock number 5305000014779.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-001-4779.
-
MPN or Model
1611208PC155
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.750 inches -
Fastener Length
2.000 inches -
Head Style
Hexagon -
Head Height
Between 0.455 inches and 0.483 inches -
Width Between Flats
Between 1.100 inches and 1.125 inches -
Locking Feature
Pellet threads -
Thread Diameter
0.750 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
10 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
25.0 rockwell c and 34.0 rockwell c -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Surface Treatment
Zinc -
Surface Treatment Specification
Qq-z-325, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5945-00-022-4013 MPN 2133555PC5Electromagnetic Relay
- 5935-00-057-2573 MPN 1556722Electrical Plug Connector
- 5985-00-073-0595 MPN 2270715Electrical Dummy Load
- 5930-00-074-1430 MPN 2042463PC1Switch Pressure
- 5950-00-076-7829 MPN 2493276-2Radio Frequency Coil
- 5905-00-106-0153 MPN 63A76A1006-1Wire Wound Fixed Resistor
- 5940-00-171-0485 MPN 654082PC1Terminal Board
- 5945-00-191-3045 MPN 2528172Directional Plunger
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-001-4779 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
1611208PC155 | Navair And Navsea Managed |