NSN 5305-00-001-9940
High Torque Screw
Between 0.470 inches and 0.517 inches fastener length, flat countersunk head style, between 0.325 inches and 0.385 inches head diameter, grip diameter: between 0.1885 inches and 0.1894 inches .
Manufacturer part number 72791H3A4 for national stock number 5305000019940.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-001-9940.
-
MPN or Model
72791H3A4
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.236 inches -
Fastener Length
Between 0.470 inches and 0.517 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.325 inches and 0.385 inches -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.190 inches -
Grip Length
0.250 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Countersink Angle
100.0 degrees -
Material
Steel comp h11 -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-001-8629 MPN GS839DR2Sensitive Switch
- 1560-00-003-9065 MPN A51B20121-1Fixed Fairing Assembly
- 1560-00-004-3095 MPN A51B92340-12Pin Latch Cover
- 1560-00-098-0971 MPN 89WM2100-1Fitting Asy
- 5985-00-191-1769 MPN 128SCAV717-3Waveguide Horn
- 1680-00-263-4667 MPN 1128GSR2-7Aircraft Ejection Seat
- 1560-00-278-3910 MPN 123AMM10112-1Fitting Assembly
- 1560-00-306-3103 MPN 94008-1LWing Landing Flap Hinge
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
![Mechanic Bill explains High Torque Screw](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5305-00-001-9940 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
72791H3A4 | Sps Technologies, Llc |
GB510AD3A4 | Northrop Grumman Systems Corporation |
72791H3A4 | Sps Technologies Inc |
Stock Check
![](/public/images/partscage_shelf3.png)