NSN 5305-00-003-6868
High Torque Screw
Between 0.448 inches and 0.495 inches fastener length, flat countersunk head style, between 0.256 inches and 0.261 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number 51B581-2-3 for national stock number 5305000036868.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-003-6868.
-
MPN or Model
51B581-2-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.162 inches and 0.229 inches -
Fastener Length
Between 0.448 inches and 0.495 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.256 inches and 0.261 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.266 inches and 0.286 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp e4340 or steel comp 4340 or steel comp 4140 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification single treatment response -
Thread Series Designator
Unjc -
Specification Data
76823-51b581 manufacturers standard
More from these suppliers
- 1560-00-162-0975 MPN 14-74267-2Flap Actuating Arm
- 1560-00-771-7543 MPN 2-12371-1Bearing Insert
- 1560-00-785-8702 MPN 3-40459-1Strut Door Crank
- 1560-01-038-8407 MPN 14-28101-13Aircraft Pylon
- 1560-01-040-3476 MPN 18-10813-602Aircraft Access Door
- 5985-01-163-1843 MPN 14-11620-17Antenna Cover
- 1560-00-153-3163 MPN 3-64501-1Angle Of Attack Indexer Cover
- 1560-00-905-4449 MPN 3-11233-5BFuselage Firewall
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-003-6868 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B581-2-3 | Northrop Grumman Technical Services, |
51B581-2-3 | Northrop Grumman Systems Corporation |