NSN 5305-00-003-7118
High Torque Screw
Between 0.610 inches and 0.630 inches fastener length, flat chamfer head style, between 0.220 inches and 0.230 inches head diameter, head height: between 0.180 inches and 0.200 inches .
Manufacturer part number 3012T70P01 for national stock number 5305000037118.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-003-7118.
-
MPN or Model
3012T70P01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.190 inches and 0.230 inches -
Fastener Length
Between 0.610 inches and 0.630 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.220 inches and 0.230 inches -
Head Height
Between 0.180 inches and 0.200 inches -
Grip Diameter
Between 0.1313 inches and 0.1316 inches -
Internal Drive Style
Hexagon -
Thread Diameter
0.138 inches -
Grip Length
Between 0.400 inches and 0.420 inches -
Width Across Flats
Between 0.109 inches and 0.111 inches -
Thready Qty Per Inch (tpi)
32 -
Hardness Rating
40.0 rockwell c -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Thread Series Designator
Unc
More from these suppliers
- 4920-00-204-4451 MPN 21C5133G01Casing Handle
- 5305-01-579-3978 MPN 3015T91P02Setscrew
- 5306-00-144-8009 MPN 3024T06P01Eccentric Head Bolt
- 5306-01-504-4717 MPN 5111T73P04Air Rod End Bearing
- 5320-00-731-7424 MPN 2003T76P01Solid Rivet
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-003-7118 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3012T70P01 | General Electric Company |