NSN 5305-00-003-9411
Panel Screw
0.875 inches fastener length, pan no. 2 head style, between 0.256 inches and 0.270 inches head diameter, head height: between 0.072 inches and 0.082 inches .
Manufacturer part number 7071637-01 for national stock number 5305000039411.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-003-9411.
-
MPN or Model
7071637-01
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.275 inches -
Fastener Length
0.875 inches -
Head Style
Pan no. 2 -
Head Diameter
Between 0.256 inches and 0.270 inches -
Head Height
Between 0.072 inches and 0.082 inches -
First Diameter From Head
Between 0.090 inches and 0.100 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
Between 0.580 inches and 0.620 inches -
Internal Drive Style
Slot -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Externally Relieved Body Diameter Quantity
1 -
Material
Steel -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-465-4378 MPN 7915696-01Electrical Receptacle Connector
- 5905-00-767-3323 MPN 7901123-19Inductive Wire Wound Fixed Resistor
- 5905-01-039-9710 MPN 7906009-48Film Fixed Resistor Network
- 5935-01-045-3000 MPN 7916208-01Electrical Receptacle Connector
- 5905-01-186-4901 MPN 7906448-46Film Fixed Resistor
- 5950-01-261-6320 MPN 7167375-00Coil Case
- 5935-01-295-0128 MPN 7517534-02Electrical Plug Connector
- 5905-00-243-9034 MPN 7904179-42Inductive Wire Wound Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-003-9411 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7071637-01 | Lockheed Martin Corporation |