NSN 5305-00-004-3468
High Torque Screw
Between 0.938 inches and 0.968 inches fastener length, flat countersunk head style, between 0.527 inches and 0.560 inches head diameter, grip diameter: between 0.3735 inches and 0.3745 inches .
Manufacturer part number 7S37J6-9 for national stock number 5305000043468.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-004-3468.
-
MPN or Model
7S37J6-9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
136500 - Metal NOI/metal Alloys NOI -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.366 inches and 0.416 inches -
Fastener Length
Between 0.938 inches and 0.968 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.527 inches and 0.560 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.375 inches -
Grip Length
Between 0.552 inches and 0.572 inches -
Thready Qty Per Inch (tpi)
24 -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.808 inches first hole and 0.858 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel -
Material Specification
H-11 hb0160-001 type 1, fscm 51215 mfr ref single material response -
Surface Treatment
Nickel and zinc -
Surface Treatment Specification
La0109-005, fsc-51215 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-035-2314 MPN 168-48060-2Fuel Brace Assembly
- 1560-00-117-7712 MPN 77-33315Land Hinge Assembly
- 1560-00-196-3989 MPN 140-54011Aircraft Fairing
- 1560-00-523-7141 MPN 265-329011-12Aircraft Structural Component Support
- 1560-00-960-0779 MPN 277-540316Plate Assembly
- 5935-01-176-1675 MPN LE414-0010-0094Electrical Receptacle Connector
- 4920-01-185-6378 MPN 11A57000-031Test Equipment Dolly
- 4920-01-202-3144 MPN R-TBD-2239Aircraft Maintenance Fixture
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-004-3468 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
7S37J6-9 | Boeing Company, The |