NSN 5305-00-004-5166
High Torque Screw
Between 0.985 inches and 1.032 inches fastener length, pan head style, between 0.568 inches and 0.593 inches head diameter, head height: between 0.162 inches and 0.183 inches .
Manufacturer part number 51B223-10 for national stock number 5305000045166.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-004-5166.
-
MPN or Model
51B223-10
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.375 inches -
Fastener Length
Between 0.985 inches and 1.032 inches -
Head Style
Pan -
Head Diameter
Between 0.568 inches and 0.593 inches -
Head Height
Between 0.162 inches and 0.183 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.312 inches -
Grip Length
Between 0.610 inches and 0.640 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unf -
Specification Data
76823-51b223 manufacturers standard
More from these suppliers
- 1560-00-137-3796 MPN 2-23291-2Aircraft Spar
- 1560-00-148-4072 MPN 6-23459-11Aircraft Spar
- 1560-00-164-6984 MPN 14-28218-1Pylon Fairing
- 1560-00-559-9120 MPN 14-27200-510Wing Landing Flap
- 1560-00-780-2339 MPN 3-50519-41Engine Air Manifold
- 1680-00-826-7488 MPN 6-50850-1Aircraft Safety Lap Belt Initiator Lever Actuator
- 1560-00-860-3691 MPN 6-70528-1Console Panel Assembly
- 1560-00-869-7513 MPN 10C128C5210Cable Assy
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-004-5166 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B223-10 | Northrop Grumman Technical Services, |
51B223-10 | Northrop Grumman Systems Corporation |
51B223-10 | Northrop Grumman Systems Corporation |