NSN 5305-00-004-7034
High Torque Screw
Between 2.015 inches and 2.032 inches fastener length, flat countersunk head style, between 0.497 inches and 0.507 inches head diameter, grip diameter: between 0.2483 inches and 0.2492 inches .
Manufacturer part number A51P12507-11 for national stock number 5305000047034.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-004-7034.
-
MPN or Model
A51P12507-11
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.485 inches and 1.502 inches -
Fastener Length
Between 2.015 inches and 2.032 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.497 inches and 0.507 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.250 inches -
Grip Length
0.530 inches -
Thready Qty Per Inch (tpi)
28 -
Countersink Angle
100.0 degrees -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-00-003-3808 MPN A51K56613-4Decoder Door Assembly
- 5935-00-049-1940 MPN GC806T75P1Electrical Receptacle Connector
- 1560-00-066-6251 MPN 123CSP10011-5Aircraft Trailing Edge
- 5930-00-127-1399 MPN GS835DJ1-10Rotary Switch
- 1560-00-218-1015 MPN A51B22012-26Aircraft Skin
- 1560-00-225-0537 MPN 121WM10080-13Fitting Assembly
- 1680-00-445-8140 MPN 128ESM10004-1Seat Tilt Fitting
- 1560-00-454-0259 MPN 123SB10129-1Fitting Assy
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-004-7034 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A51P12507-11 | Northrop Grumman Systems Corporation |
A51P12507-11 | Northrop Grumman Systems Corporation |