NSN 5305-00-005-0438
High Torque Screw
Between 1.218 inches and 1.265 inches fastener length, flat countersunk head style, between 0.573 inches and 0.635 inches head diameter, grip diameter: between 0.3108 inches and 0.3117 inches .
Manufacturer part number 124380-5-14P for national stock number 5305000050438.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-005-0438.
-
MPN or Model
124380-5-14P
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.333 inches and 0.400 inches -
Fastener Length
Between 1.218 inches and 1.265 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.573 inches and 0.635 inches -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Internal Drive Style
High-torque -
Thread Diameter
0.312 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel -
Material Specification
Sps-m-107, fscm 56878 mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type 1, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
26512-gb510m manufacturers standard
More from these suppliers
- 1560-00-124-1502 MPN A51B18036-83Access Rod Assembly
- 1560-00-165-8210 MPN 88096LAircraft Door
- 1560-00-180-9749 MPN 30F84634-2Battery Lift Guide
- 5935-00-189-3249 MPN GR530A6S080Electrical Connector Shell
- 5985-00-201-5058 MPN GC851BV1Directional Coupler
- 1560-00-229-2262 MPN 30F85188-1Terminal Stri Cover
- 5935-00-237-1565 MPN GC810JK1Electrical Plug Connector
- 1560-00-373-5319 MPN 89F1192-5Panel Plastic
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-005-0438 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
124380-5-14P | Sps Technologies, Llc |
GB510FH5-14P | Sps Technologies, Llc |
GB510M5A14 | Northrop Grumman Systems Corporation |
SFH26-5A14 | Sps Technologies, Llc |
SFH26-5A14 | Sps Technologies, Llc |
PBF1476-5-14P | Sps Technologies, Llc |
GB510FH5-14P | Northrop Grumman Systems Corporation |