NSN 5305-00-005-5918
High Torque Screw
Between 1.801 inches and 1.848 inches fastener length, pan head style, between 0.464 inches and 0.488 inches head diameter, head height: between 0.133 inches and 0.150 inches .
Manufacturer part number 51B222-24H for national stock number 5305000055918.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-005-5918.
-
MPN or Model
51B222-24H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.286 inches and 0.363 inches -
Fastener Length
Between 1.801 inches and 1.848 inches -
Head Style
Pan -
Head Diameter
Between 0.464 inches and 0.488 inches -
Head Height
Between 0.133 inches and 0.150 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 1.485 inches and 1.515 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.675 inches first hole and 1.742 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
76823-51b222 manufacturers standard
More from these suppliers
- 1560-00-069-7927 MPN 3-11883-11Aircraft Access Cover
- 1560-00-074-2481 MPN 7-74126-1Bell Crank
- 1560-00-186-0183 MPN 3-023005-2Bulkhead Installation Fitting
- 1560-00-220-5825 MPN 6-70015-1Trim Interior Panel
- 1560-00-404-8014 MPN 14-11232-4Aircraft Access Cover
- 1560-00-767-9605 MPN 2-23801-1Aircraft Structural Component Support
- 1680-01-044-7736 MPN 2-70214-7Crew Ejection Seat Trigger
- 1560-01-168-6225 MPN 6-73441-1Crank
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-005-5918 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B222-24H | Northrop Grumman Technical Services, |
51B222-24H | Northrop Grumman Systems Corporation |