NSN 5305-00-006-6574
Tap Bolt
Between 0.969 inches and 1.000 inches fastener length, hexagon head style, between 0.226 inches and 0.243 inches head height, width between flats: between 0.551 inches and 0.562 inches .
Manufacturer part number FF-S-85 for national stock number 5305000066574.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-006-6574.
-
MPN or Model
FF-S-85
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.000 inches -
Fastener Length
Between 0.969 inches and 1.000 inches -
Head Style
Hexagon -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
25.0 rockwell c and 34.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
63.0 microinches threads -
Material
Steel -
Material Specification
Sae gr 5 assn standard single material response -
Surface Treatment
Cadmium and chromate -
Special Test Features
Special quality control testing -
Surface Treatment Specification
Qq-p-416, type 2 cl 2 federal specification single treatment response -
Test Data Document
81349-mil-p-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.). -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
2 type and 10p style and 5 grade -
Departure From Cited Designator
Material must conform to ships parts control center special quality control provisions
More from these suppliers
- 5940-01-425-7393 MPN NAS1063A11-320Terminal Board Marker Strip
- 5305-00-043-0417 MPN NAS1124-1HClose Tolerance Screw
- 5305-00-052-6887 MPN MS35198-48Machine Screw
- 5305-00-068-5409 MPN MS16995-1Socket Head Cap Screw
- 5305-00-081-6668 MPN MS24693S2Machine Screw
- 5305-00-082-1724 MPN MS27039-0820Machine Screw
- 5305-00-082-6667 MPN NAS1352C06-12Socket Head Cap Screw
- 5305-00-145-0747 MPN NAS1218-08-1Machine Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-006-6574 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FF-S-85 | Federal Specifications |
MS90725-600 | National Aerospace Standards |
MS90725-600 | Military Standards |