NSN 5305-00-010-0867
Bolt Stove
0.375 inches fastener length, flat countersunk head style, between 0.340 inches and 0.385 inches head diameter, internal drive style: slot.
Manufacturer part number FF-S-92 for national stock number 5305000100867.
Datasheet
-
Product description
Machine Screw NSN 5305-00-010-0867.
-
MPN or Model
FF-S-92
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Length
0.259 inches -
Fastener Length
0.375 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.340 inches and 0.385 inches -
Internal Drive Style
Slot -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
60000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel -
Screw Material Specification
Qq-s-634 federal specification single material response or qq-s-637 federal specification single material response or 66 federal standard single material response -
Thread Series Designator
Unf -
Specification Data
81348-ff-s-92 government specification and 96906-ms35238/canceled/ government standard -
Nondefinitive Specification/std Data
1 type and 2s style
More from these suppliers
- 4920-01-550-6562 MPN 182555-7Rotary Electro-mechanical Actuator
- 5306-00-754-3049 MPN 91-31048-00Machine Bolt
- 6105-00-212-7903 MPN 14-98052-00Direct Current Motor
- 5905-00-100-6857 MPN 522652Inductive Wire Wound Fixed Resistor
- 5905-00-109-0371 MPN A7581760Inductive Wire Wound Fixed Resistor
- 5940-00-329-5409 MPN 7546015Terminal Board
- 5975-00-615-1380 MPN 7550826-2Electrical Wall Plate
- 5935-00-850-6619 MPN 8437080-14Electrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-010-0867 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FF-S-92 | Federal Specifications |
E95 | Curtiss-wright Controls, Inc |
100867 | Army, United States Department Of |
133624 | Army, United States Department Of |
0901283 | Allis-chalmers Corp |
901283 | Allis-chalmers Corp |
MS35238-70 | Military Standards |