NSN 5305-00-011-9844
Tap Bolt
1.375 inches fastener length, hexagon head style, between 0.302 inches and 0.323 inches head height, width between flats: between 0.736 inches and 0.750 inches .
Manufacturer part number MS35293-112 for national stock number 5305000119844.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-011-9844.
-
MPN or Model
MS35293-112
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.125 inches -
Fastener Length
1.375 inches -
Head Style
Hexagon -
Head Height
Between 0.302 inches and 0.323 inches -
Width Between Flats
Between 0.736 inches and 0.750 inches -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
13 -
Min. Tensile Strength (psi)
69000 pounds per square inch -
Hardness Rating
100.0 rockwell b -
Material
Steel -
Surface Treatment
Phosphate -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
2 type and 10p style and 2 grade
More from these suppliers
- 5306-00-841-1881 MPN 191811Machine Bolt
- 4920-00-587-8279 MPN 6796587Compressor Support
- 5945-00-672-4141 MPN 6812791Electrical Relay Base
- 4820-00-785-5226 MPN 5171128Directional Control Linear Valve
- 4820-01-510-6388 MPN 10070107Vent Valve
- 5305-00-010-0818 MPN 100818Machine Screw
- 5305-00-013-2500 MPN 132500Machine Screw
- 5305-00-021-5943 MPN 215943Hexagon Head Cap Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-011-9844 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35293-112 | Military Standards |
119844 | General Motors Corp |
119844 | Army Weapons Command |