NSN 5305-00-013-3359
Bolt Stove
0.188 inches fastener length, flat countersunk undercut head style, between 0.207 inches and 0.225 inches head diameter, head height: between 0.036 inches and 0.048 inches .
Manufacturer part number 133359 for national stock number 5305000133359.
Datasheet
-
Product description
Machine Screw NSN 5305-00-013-3359.
-
MPN or Model
133359
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.188 inches -
Fastener Length
0.188 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.207 inches and 0.225 inches -
Head Height
Between 0.036 inches and 0.048 inches -
Internal Drive Style
Slot -
Thread Diameter
0.112 inches -
Thready Qty Per Inch (tpi)
40 -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel comp 1010 or steel comp 1011 or steel comp 1015 or steel comp 1016 or steel comp 1018 or steel comp 1019 or steel comp 1020 -
Screw Material Specification
Qq-s-633 federal specification all material responses -
Screw Surface Treatment
Cadmium or zinc -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
1 type and 2s style
More from these suppliers
- 5305-00-013-9323 MPN 139323Setscrew
- 5305-00-290-3319 MPN 100714Machine Screw
- 5320-00-011-1892 MPN 111892Tubular Rivet
- 5320-00-754-0260 MPN 76390Tubular Rivet
- 4920-00-631-6565 MPN 6796671Housing Axial Compressor Spacer
- 4920-00-753-8710 MPN 6799617Aircraft Engine Maintenance Fixture
- 5905-00-850-4195 MPN 8597263-262Film Fixed Resistor
- 4920-00-707-4622 MPN 6796810Interface Device Adapter Assembly
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-013-3359 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
133359 | General Motors Llc |
133359 | Daimler Chrysler |
MS35241-19 | Military Standards |
133359 | General Motors Corp |