NSN 5305-00-013-3781
Bolt Stove
1.250 inches fastener length, flat countersunk head style, between 0.452 inches and 0.507 inches head diameter, internal drive style: slot.
Manufacturer part number MS35241-91 for national stock number 5305000133781.
Datasheet
-
Product description
Machine Screw NSN 5305-00-013-3781.
-
MPN or Model
MS35241-91
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.097 inches -
Fastener Length
1.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.452 inches and 0.507 inches -
Internal Drive Style
Slot -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
60000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel -
Screw Material Specification
Qq-s-634 federal specification single material response or qq-s-637 federal specification single material response or 66 federal standard single material response -
Screw Surface Treatment
Cadmium or zinc -
Screw Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification 1st treatment response or qq-z-325, type 2, cl 3 federal specification 2nd treatment response -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
1 type and 2s style
More from these suppliers
- 5940-00-057-2813 MPN 1851145Lug Terminal
- 1680-00-587-9287 MPN 6516475Rotor Cone
- 5935-00-622-4948 MPN 5944835Electrical Receptacle Connector
- 5935-00-683-5493 MPN 8575602Electrical Receptacle Connector
- 4920-00-872-3939 MPN 6799775G Alignment Fixture
- 4920-00-981-5784 MPN 6796697Interface Device Adapter Assembly
- 5305-00-013-2756 MPN 132756Machine Screw
- 5305-00-017-5574 MPN 175574Tapping Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-013-3781 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35241-91 | Military Standards |
133781 | General Motors Corp |
D11076-2-47 | Met-pro Corporation |