NSN 5305-00-018-0123
Tap Bolt
1.125 inches fastener length, between 0.226 inches and 0.243 inches head height, between 0.551 inches and 0.562 inches width between flats, thread diameter: 0.375 inches.
Manufacturer part number MS35297-61 for national stock number 5305000180123.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-018-0123.
-
MPN or Model
MS35297-61
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.000 inches -
Fastener Length
1.125 inches -
Head Height
Between 0.226 inches and 0.243 inches -
Width Between Flats
Between 0.551 inches and 0.562 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 30.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate or zinc and chromate -
Thread Series Designator
Unc
More from these suppliers
- 5305-00-011-4409 MPN 114409Machine Screw
- 5305-00-016-0064 MPN 160064Machine Screw
- 5305-00-042-8489 MPN 428489Hexagon Head Cap Screw
- 4920-00-218-1256 MPN 2989Aircraft Maintenance Fixture
- 4920-00-794-7656 MPN 6799870Test Adapter
- 4820-01-303-6654 MPN 3268268Pressure And Temperature Relief Valve
- 4820-01-571-7748 MPN 6839365Directional Control Linear Valve
- 5305-00-016-9552 MPN 169552Tapping Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-018-0123 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35297-61 | Military Standards |
180123 | General Motors Corp |
60X3232 | Napco International Llc |
180123 | Army Weapons Command |
180123 | Flxible Co The |