NSN 5305-00-018-1170
Tap Bolt
2.250 inches fastener length, hexagon head style, between 0.302 inches and 0.323 inches head height, width between flats: between 0.736 inches and 0.750 inches .
Manufacturer part number MS35299-116 for national stock number 5305000181170.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-018-1170.
-
MPN or Model
MS35299-116
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.250 inches -
Fastener Length
2.250 inches -
Head Style
Hexagon -
Head Height
Between 0.302 inches and 0.323 inches -
Width Between Flats
Between 0.736 inches and 0.750 inches -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
13 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 30.0 rockwell c -
Material
Steel -
Surface Treatment
Phosphate -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
2 type and 10p style and 5 grade
More from these suppliers
- 5305-00-269-2815 MPN 433348Hexagon Head Cap Screw
- 5306-00-011-9414 MPN 119414Square Neck Bolt
- 5975-00-335-2586 MPN 15039RFlexible Nonmetallic Conduit
- 1560-00-343-8022 MPN 6734208Aircraft Structural Component Fitting
- 5945-00-428-6353 MPN 1119869Electromagnetic Relay
- 5940-00-636-7349 MPN 8599116-024Grounding Metallic Shielded Cable Ferrule
- 5905-00-695-6137 MPN 1900576Inductive Wire Wound Fixed Resistor
- 5950-00-833-9015 MPN 7901641-006Reactor
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-018-1170 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35299-116 | Military Standards |
FFS85TYPE2STYLE10PGRADE5 | Federal Specifications |
181170 | General Motors Corp |
181170 | Army Weapons Command |
181170 | Navistar Intl Corp |