NSN 5305-00-018-1721
Tap Bolt
1.125 inches fastener length, hexagon head style, between 0.348 inches and 0.371 inches head height, width between flats: between 0.798 inches and 0.813 inches .
Manufacturer part number MS35298-135 for national stock number 5305000181721.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-018-1721.
-
MPN or Model
MS35298-135
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.125 inches -
Fastener Length
1.125 inches -
Head Style
Hexagon -
Head Height
Between 0.348 inches and 0.371 inches -
Width Between Flats
Between 0.798 inches and 0.813 inches -
Thread Diameter
0.562 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Hardness Rating
23.0 rockwell c and 30.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate or zinc and chromate -
Thread Series Designator
Unf -
Nondefinitive Specification/std Data
2 type and 10p style and 5 grade
More from these suppliers
- 5306-00-737-3770 MPN 1263585U Bolt
- 5305-00-018-9597 MPN 189597Hexagon Head Cap Screw
- 5305-01-053-6970 MPN 9407000Socket Head Cap Screw
- 5306-00-010-9180 MPN 109180Machine Bolt
- 5940-00-204-7132 MPN 8599116-002Grounding Metallic Shielded Cable Ferrule
- 4920-00-789-8554 MPN 6799701Aircraft Maintenance Fixture
- 5905-00-811-3141 MPN 8560698-006Nonprecision Wire Wound Variable Resistor
- 5930-00-081-9804 MPN 1513343Thermostatic Switch
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-018-1721 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35298-135 | Military Standards |
FFS85TYPE2STYLE10PGRADE5 | Federal Specifications |
123650 | Daimler Chrysler |
181721 | General Motors Corp |
181721 | Army Weapons Command |