NSN 5305-00-019-9444
Tap Bolt
Between 3.125 inches and 3.375 inches fastener length, hexagon head style, between 0.378 inches and 0.403 inches head height, width between flats: between 0.906 inches and 0.937 inches .
Manufacturer part number MS16208-145 for national stock number 5305000199444.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-019-9444.
-
MPN or Model
MS16208-145
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
1.500 inches -
Fastener Length
Between 3.125 inches and 3.375 inches -
Head Style
Hexagon -
Head Height
Between 0.378 inches and 0.403 inches -
Width Between Flats
Between 0.906 inches and 0.937 inches -
Thread Diameter
0.625 inches -
Thready Qty Per Inch (tpi)
11 -
Min. Tensile Strength (psi)
75000 pounds per square inch -
Minimum Yield Strength
30000 pounds per square inch -
Material
Steel comp 302 or steel comp 304 or steel comp 305 or steel comp 310 or steel comp 316 -
Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5940-01-413-3004 MPN NAS1063B149-165Terminal Board Marker Strip
- 5305-00-001-4754 MPN NAS1018-34AHexagon Head Cap Screw
- 5305-00-007-0216 MPN NAS1743C4T20USocket Head Cap Screw
- 5305-00-008-5896 MPN NAS1102E5-10Machine Screw
- 5305-00-057-0529 MPN MS51958-47Machine Screw
- 5305-00-104-7537 MPN NAS1189-04P6LSocket Head Cap Screw
- 5305-00-150-0804 MPN NAS1131C8Close Tolerance Screw
- 5305-00-150-9564 MPN MILS7839Machine Screw
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-019-9444 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS16208-145 | National Aerospace Standards |
MS16208-145 | Military Standards |
Stock Check
- NS: 44
- NE: 87