NSN 5305-00-021-3836
Tap Bolt
Between 3.406 inches and 3.500 inches fastener length, hexagon head style, between 0.302 inches and 0.323 inches head height, width between flats: between 0.736 inches and 0.750 inches .
Manufacturer part number MS35307-421 for national stock number 5305000213836.
Datasheet
-
Product description
Hexagon Head Cap Screw NSN 5305-00-021-3836.
-
MPN or Model
MS35307-421
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 1.250 inches and 1.438 inches -
Fastener Length
Between 3.406 inches and 3.500 inches -
Head Style
Hexagon -
Head Height
Between 0.302 inches and 0.323 inches -
Width Between Flats
Between 0.736 inches and 0.750 inches -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
13 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Hardness Rating
80.0 rockwell c -
Material
Steel comp 302 or steel comp 303 or steel comp 304 -
Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 6110-01-290-7596 MPN 30600100Generator Control
- 5305-00-207-8253 MPN SPP60-0157Hexagon Head Cap Screw
- 5905-00-112-4532 MPN 0193PC0193-106Nonprecision Wire Wound Variable Resistor
- 5935-00-241-3923 MPN 338615Plug-in Electronic Components Socket
- 5935-00-280-1915 MPN 837261Electrical Receptacle Connector
- 4820-00-520-8143 MPN 24004Air Vent Assy
- 5905-00-552-6033 MPN 723168-53Film Fixed Resistor
- 5905-00-574-3871 MPN 1691737-901Resistor Assembly
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.
Pricing and Availability
Get a quote for 5305-00-021-3836 hexagon head cap screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35307-421 | Military Standards |
FFS85TYPE2STYLE10P | Federal Specifications |
419-643 | Lockheed Martin Corporation |
04-0060 ITEM NO 61 | Ward Leonard Ct Llc |
Stock Check
- NS: 126
- NE: 812