NSN 5305-00-021-7789
High Torque Screw
Between 3.313 inches and 3.353 inches fastener length, flat chamfer head style, between 0.3737 inches and 0.3742 inches head diameter, head height: between 0.253 inches and 0.273 inches .
Manufacturer part number AS104-04-46 for national stock number 5305000217789.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-021-7789.
-
MPN or Model
AS104-04-46
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.270 inches -
Fastener Length
Between 3.313 inches and 3.353 inches -
Head Style
Flat chamfer -
Head Diameter
Between 0.3737 inches and 0.3742 inches -
Head Height
Between 0.253 inches and 0.273 inches -
Locking Feature
Pellet threads -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches all holes and 0.086 inches all holes -
Internal Drive Style
Hexagon -
Thread Diameter
0.250 inches -
Grip Length
Between 2.875 inches and 2.895 inches -
Width Across Flats
0.188 inches -
Thready Qty Per Inch (tpi)
28 -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.204 inches all holes and 3.244 inches all holes -
Material
Stainless steel -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-104-5380 MPN 3-64214-1All Attitude Pitot Sump
- 5305-01-303-6354 MPN CA29048-08-650Panel Screw Assembly
- 5305-01-465-7825 MPN CA22043-10-0300Panel Screw Assembly
- 5306-00-005-0548 MPN CA4519-5-17Close Tolerance Bolt
- 4920-00-127-0419 MPN 12A3315-1Aircraft Maintenance Fixture
- 5985-00-291-8582 MPN 583Z4307-801Waveguide Assembly
- 1560-00-409-2745 MPN 12Y1276-27Heat Exchanger Air Duct Flange
- 1560-00-439-0041 MPN 12L101-831Aircraft Door
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-021-7789 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AS104-04-46 | Avibank Mfg., Inc. |
CA2730-4-46 | Arconic Global Fasteners & Rings, |
CC00035-4-46 | Lockheed Martin Corporation |