NSN 5305-00-022-6765
Bolt Stove
Between 0.219 inches and 0.250 inches fastener length, flat countersunk head style, between 0.171 inches and 0.199 inches head diameter, internal drive style: slot.
Manufacturer part number FF-S-92 TY I STY 2S for national stock number 5305000226765.
Datasheet
-
Product description
Machine Screw NSN 5305-00-022-6765.
-
MPN or Model
FF-S-92 TY I STY 2S
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.208 inches and 0.250 inches -
Fastener Length
Between 0.219 inches and 0.250 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.171 inches and 0.199 inches -
Internal Drive Style
Slot -
Thread Diameter
0.099 inches -
Thready Qty Per Inch (tpi)
48 -
Min. Tensile Strength (psi)
60000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Steel -
Screw Material Specification
Qq-s-633 federal specification single material response -
Screw Surface Treatment
Cadmium or zinc -
Screw Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification 1st treatment response or qq-z-325, type 2, cl 3 federal specification 2nd treatment response -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
1 type and 2s style
More from these suppliers
- 5930-00-225-4855 MPN 1513461Thermostatic Switch
- 4920-00-787-3166 MPN 6797651Rolle Clamp Srplate
- 5940-00-246-6297 MPN 5935457Terminal Board
- 4820-01-303-6517 MPN 326 7384Valve
- 5305-00-010-0868 MPN 100868Machine Screw
- 5305-00-011-4409 MPN 114409Machine Screw
- 5305-00-013-3473 MPN 133473Machine Screw
- 5305-00-358-5397 MPN 838959Machine Screw
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-022-6765 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
FF-S-92 TY I STY 2S | Federal Specifications |
226765 | General Motors Corp |