NSN 5305-00-022-7091
Bolt Stove
Between 0.156 inches and 0.188 inches fastener length, flat countersunk undercut head style, between 0.249 inches and 0.279 inches head diameter, head height: between 0.046 inches and 0.060 inches .
Manufacturer part number MS35249-32 for national stock number 5305000227091.
Datasheet
-
Product description
Machine Screw NSN 5305-00-022-7091.
-
MPN or Model
MS35249-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.126 inches and 0.188 inches -
Fastener Length
Between 0.156 inches and 0.188 inches -
Head Style
Flat countersunk undercut -
Head Diameter
Between 0.249 inches and 0.279 inches -
Head Height
Between 0.046 inches and 0.060 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.138 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
80000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Stainless steel -
Screw Material Specification
Qq-s-763 federal specification single material response -
Screw Surface Treatment
Passivate -
Thread Series Designator
Unc
More from these suppliers
- 5950-00-038-6298 MPN MS75084-17Radio Frequency Coil
- 5935-00-052-8379 MPN MS3108R20-15PZElectrical Plug Connector
- 5935-00-102-7999 MPN MS16108-10CTip Jack
- 5935-00-105-5492 MPN MS3137E12-50PElectrical Plug Connector
- 5905-00-114-5393 MPN MS35043-143Composition Fixed Resistor
- 5935-00-149-3245 MPN MS3102A16S1SElectrical Receptacle Connector
- 5935-00-211-1388 MPN MS27473E14B37SElectrical Plug Connector
- 5935-00-227-9766 MPN MS3100K20-2SCElectrical Receptacle Connector
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-022-7091 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35249-32 | Military Standards |