NSN 5305-00-022-7310
Bolt Stove
Between 0.406 inches and 0.437 inches fastener length, flat countersunk head style, between 0.156 inches and 0.172 inches head diameter, internal drive style: slot.
Manufacturer part number MS35245-13 for national stock number 5305000227310.
Datasheet
-
Product description
Machine Screw NSN 5305-00-022-7310.
-
MPN or Model
MS35245-13
-
Schedule B
7415.33.8550 (Other copper screws (not for wood) bolts and nuts) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.406 inches and 0.437 inches -
Fastener Length
Between 0.406 inches and 0.437 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.156 inches and 0.172 inches -
Internal Drive Style
Slot -
Thread Diameter
0.086 inches -
Thready Qty Per Inch (tpi)
56 -
Min. Tensile Strength (psi)
55000 pounds per square inch -
Countersink Angle
Between 80.0 degrees and 82.0 degrees -
Screw Material
Copper alloy -
Screw Material Specification
Qq-b-613 federal specification single material response or qq-b-626 federal specification single material response or qq-w-321 federal specification single material response -
Thread Series Designator
Unc -
Nondefinitive Specification/std Data
1 type and 2s style
More from these suppliers
- 5905-00-208-4675 MPN 2501459-563Film Fixed Resistor
- 5940-00-254-6706 MPN 2503521-19Stud Terminal
- 5930-00-631-4761 MPN 1775140-2Tilt Switch
- 5950-00-773-9713 MPN 6038966-1Radio Frequency Transformer
- 5905-01-050-8175 MPN 4009963-7Film Fixed Resistor Network
- 5905-01-090-0447 MPN 1505931-5Nonprecision Nonwire Wound Variable Resistor
- 5935-01-435-6200 MPN 8519384-07Electrical Receptacle Connector
- 5320-00-753-3955 MPN 0802-213Tubular Rivet
An externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. See also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.
Pricing and Availability
Get a quote for 5305-00-022-7310 machine screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35245-13 | Military Standards |
873892-67 | Honeywell International Inc. |
873892-67 | Lockheed Martin Corporation |