NSN 5305-00-024-6317
High Torque Screw
Between 1.469 inches and 1.516 inches fastener length, flat countersunk head style, between 0.499 inches and 0.507 inches head diameter, grip diameter: between 0.2485 inches and 0.2495 inches .
Manufacturer part number 53B334-16 for national stock number 5305000246317.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-024-6317.
-
MPN or Model
53B334-16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.459 inches and 0.526 inches -
Fastener Length
Between 1.469 inches and 1.516 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.499 inches and 0.507 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.250 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Countersink Angle
Between 99.5 degrees and 100.5 degrees -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-070-6454 MPN 3-10848-17Aircraft Access Cover
- 1560-00-085-5895 MPN 3-13506-14Torque Arm Assembly
- 4820-00-147-6503 MPN 14-52934-5Valve Housing-coupling
- 1560-00-168-9705 MPN 14-11354-3Aircraft Access Cover
- 1560-00-404-8163 MPN 14-12331-9Firewall Panel
- 1560-00-715-4398 MPN 2-50427-3Gearbox Support
- 1560-00-869-7455 MPN 6-11450-1023Aircraft Access Door
- 1680-00-926-2540 MPN 9-50970-1Rotary Electro-mechanical Actuator
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-024-6317 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
53B334-16 | Northrop Grumman Technical Services, |
53B334-16 | Northrop Grumman Systems Corporation |