NSN 5305-00-024-8175
Panel Screw
Point tapered 45 degrees.
Manufacturer part number 945981 for national stock number 5305000248175.
Datasheet
-
Product description
Externally Relieved Body Screw NSN 5305-00-024-8175.
-
MPN or Model
945981
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
1.844 inches -
Head Style
Hexagon -
Head Height
0.375 inches -
Width Between Flats
0.812 inches -
First Diameter From Head
0.391 inches -
Distance From Largest Bearing Surface Of Head To End Of First Diameter
1.125 inches -
Internal Drive Style
Cross recess type 1 -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
13 -
Externally Relieved Body Diameter Quantity
1 -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 416 -
Material Specification
Qq-s-763 federal specification single material response -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-004-6990 MPN 2285374-2Plug Dummy Connector
- 5905-00-059-7394 MPN 1737314Resistor Holder
- 5935-00-063-9010 MPN 2667567-1Electrical Plug Connector
- 5930-00-067-9476 MPN 195712PC15Push Switch
- 5950-00-076-5568 MPN 2470355PC3Radio Frequency Coil
- 5930-00-087-4129 MPN 2671815-2Rotary Switch
- 5935-00-131-2210 MPN 64A7A98-3Electrical Receptacle Connector
- 5905-00-137-0805 MPN 1820888-104Film Fixed Resistor
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercut for thread relief). It is no. 0 (0.060 in.) (1.5 mm) or larger, and is designed to be held or driven with either a wrench or inserted driver (excluding internal socket and multiple spline types) or both in sizes below no. 10 (0.190 in.) (5 mm) and larger sizes must have a head designed for any type inserted driver (excluding internal socket and multiple spline types) but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. See also bolt, externally relieved body and bolt, internal wrenching.
Pricing and Availability
Get a quote for 5305-00-024-8175 externally relieved body screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
945981 | Navair And Navsea Managed |
945981 | Navair And Navsea Managed |