NSN 5305-00-026-2883
High Torque Screw
Between 0.448 inches and 0.495 inches fastener length, pan head style, 0.328 inches head diameter, head height: between 0.088 inches and 0.102 inches .
Manufacturer part number 51B220-3 for national stock number 5305000262883.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-026-2883.
-
MPN or Model
51B220-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.448 inches and 0.495 inches -
Head Style
Pan -
Head Diameter
0.328 inches -
Head Height
Between 0.088 inches and 0.102 inches -
Grip Diameter
Between 0.1620 inches and 0.1630 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.164 inches -
Grip Length
Between 0.172 inches and 0.202 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjc
More from these suppliers
- 4920-00-019-3948 MPN 6-76009-1Fuel System Adapter Set
- 1560-00-033-8655 MPN 3-70343-1Ejection Hose Retainer
- 1560-00-140-8574 MPN 14-26115-1Aircraft Skin
- 1560-00-710-2356 MPN 2-50204-505Engine Mount Assembly
- 1560-00-768-3136 MPN 2-10862-1Radio Support Bracket
- 1560-00-907-9315 MPN 3-13504-1Aircraft Ca Bracket
- 1560-01-012-8541 MPN 14-10855-24Fuselage Door Cover
- 1560-01-107-9848 MPN 14-52258-1Fairing
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-026-2883 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B220-3 | Northrop Grumman Technical Services, |
51B220-3 | Northrop Grumman Systems Corporation |