NSN 5305-00-038-1918
High Torque Screw
Between 2.011 inches and 2.058 inches fastener length, pan head style, between 0.361 inches and 0.381 inches head diameter, head height: between 0.103 inches and 0.118 inches .
Manufacturer part number 51B221-28 for national stock number 5305000381918.
Datasheet
-
Product description
Close Tolerance Screw NSN 5305-00-038-1918.
-
MPN or Model
51B221-28
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.246 inches and 0.323 inches -
Fastener Length
Between 2.011 inches and 2.058 inches -
Head Style
Pan -
Head Diameter
Between 0.361 inches and 0.381 inches -
Head Height
Between 0.103 inches and 0.118 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Internal Drive Style
Offset cruciform (torque set) -
Thread Diameter
0.190 inches -
Grip Length
Between 1.735 inches and 1.765 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp 4340 or steel comp 4140 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-390-0587 MPN NAS1101E4H10Machine Screw
- 5305-01-168-9201 MPN LD111-0047-0303Close Tolerance Screw
- 5305-01-193-4437 MPN AIC81-4-1Machine Screw
- 5305-01-298-6241 MPN AIC984-4-6RClose Tolerance Screw
- 5305-01-303-6352 MPN AIC939-3-6Close Tolerance Screw
- 5305-01-329-9741 MPN AIC1700-4-7AClose Tolerance Screw
- 5305-01-357-6952 MPN 1701-4-4Hexagon Head Cap Screw
- 5305-01-435-6397 MPN AIC1515-3-5Close Tolerance Screw
A screw, machine or screw, cap, socket head whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 in.) (0.025 mm) or less of a specific diameter for items (1.000 in.) (25 mm) or less in diameter. Items over (1.000 in.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 in.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 in.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Pricing and Availability
Get a quote for 5305-00-038-1918 close tolerance screwManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
51B221-28 | Northrop Grumman Systems Corporation |
51B221-28 | Sps Technologies, Llc |
51B221-28 | Arconic Global Fasteners & Rings, |
51B221-28 | Sps Technologies, Llc |
51B221-28 | Hi-shear Corporation |
51B221-28 | Sps Technologies, Llc |
51B221-28 | Alcoa Global Fasteners, Inc. |
51B221-28 | Lisi Aerospace Canada Corp |
51B221-28 | Huck Intl Inc |